HERITAGE EDITION Bronco Club

[5GENIDN]

nice looking rig, what are the running for the light bar? Do you by chance have a front pic, trying to get ideas for a light bar that looks good on the heritage =)

It is the KC light bar.... center 4 are spot and the outer 4 are flood. the light it up pretty well. They say they do not work with the factory rack but with a little customizing they do.

Funny only straight on shot I have is this one... I am running the clear caps on the KCs because I thought the black caps added too much black up high and distracted from the look.

Edit: not true... I did find a one other straight on shot.... added below.

Sponsored

 

[Calypso]

Downsized my tires to a P285/70-17, Cooper Discoverer AT3 4S.

Wanted a bit more "civilized" (yes, car-like ) ride. I have a 50 mile commute at interstate speeds (in Charlotte, that's anything 80mph+. Gotta get there fast!), and the Territories were noisier and knobbier than I cared for.
The Bronco feels quicker in the throttle with the smaller tire, and 5th and 6th gear (manual) have become very usable on the highway. 1st gear of course is shorter, but it was already short with the 315/70's. I run 1700 to 2200 rpm with 21.5 to 22 mpg so far. Generally I stay below 75 mph in practice, as the wind noise becomes 'loud' at higher speeds, and the mpg starts its noticeable decline as well.

I also like the little tuck at the fender.

 

[BigBendBW]

Nice! I routed it to Aux 3, was funner than I expected to do the wiring

I won’t even tell you how long it took me to install them

 

[L&D's Broncos]

Well, I finally got some good news this week. Friday they sent me an email that it was built! ( After being stuck in production since Feb, 9.) and then Saturday they sent one and it says shipped! We are going to Townsend Tenn. on the 12-13 of April and again on the 19-20 for Bronco Super Celebration so it might actually make it in time to take it along with the 73'
Is anyone on here going either weekend?

 

[EvilJim1971]

We are going to Townsend Tenn. on the 12-13 of April and again on the 19-20 for Bronco Super Celebration so it might actually make it in time to take it along with the 73'
Is anyone on here going either weekend?

We will be there the second weekend!

 

[RedWagon]

I’d like the steering rack and the cupholders but happy to keep my 8”. Driving at night with that screen would just be too much for me lol

Would love the steering rack, if it had a warranty attached. Wonder if I could to get the front camera to work on a 8”. I think that is the only reason I would want a 12” screen.

 

[1966Fan]

Was an early reservation holder. Watched all the chaos unfold for a year and kept checking dealers but everyone had crazy ADMs. Decided to grab a lightly used Hella Yella Rubicon to hold me over.

saw this ‘23 with 1800 miles and couldn’t resist…finally joined the club!

 

[Jbatey84]

Any recommendations on white Bronco script? Wife removed her side stripes and wants the white Bronco script on rear side of the front fenders.

Thanks!

 

[BigFootie]

Any recommendations on white Bronco script? Wife removed her side stripes and wants the white Bronco script on rear side of the front fenders.

Thanks!

Archtyperacing makes them in machined satin finished aluminum but they area bit pricey. If you are just looking for stickers, plenty online.

 

[Brave Man]

Archtyperacing makes them in machined satin finished aluminum but they area bit pricey. If you are just looking for stickers, plenty online.

here is my Archetype Racing script in grey satin finish

 

[Bsmitty56]

Question for the other heritage people: how do you plan on keeping those pretty white wheels looking pristine? Are there methods to keep them clean or easier to clean? Is the white coating going to chip easily?

I've had great luck with Gyeon Quartz Rim Coating (via Amazon). So much easier to clean. If you go this route, take the time to pull the wheels off. I applied it with the wheels on and didn't get the best coverage around the lug nuts.

 

[DrewMackin]

I'm searching for a set of ditch lights that blend well cosmetically with the Heritage style. I'm thinking of KC LED Daylighters with their Bronco specific mounts. Has anyone installed these on their rig and is willing to share a pic or two of how they look?

I wanted the vintage look for the ditch lights and went with the 4” KC HiLites.

 

[JawnyBronco]

Any recommendations on white Bronco script? Wife removed her side stripes and wants the white Bronco script on rear side of the front fenders.

Thanks!

Here’s something different I seen… not sure how I feel about it yet…

 

[subiefiles]

Just picked up my Heritage a couple days ago, azure metallic, 2 door, manual. 150 miles on it and already cracked the windshield

 

[EvilJim1971]

Whatever you do, didn't go with the original sized metal script. Due to the

Any recommendations on white Bronco script? Wife removed her side stripes and wants the white Bronco script on rear side of the front fenders.

Thanks!

Shape and curvature of the fender... they are a PITA to get to conform to it.

Sponsored