What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[BigBlue7]

Had my SAS beauty rings powder coated yesterday

Sponsored

 

[Shrek27]

Had my SAS beauty rings powder coated yesterday

I did this too and found it very satisfying to add more black to my Black Diamond...felt like I was just correcting something from the factory....c'mon Ford!

 

[jsoa]

Added turnoffroad's rear window Molle panels
https://turnoffroad.com/collections...cts/2021-ford-bronco-rear-window-molle-panels

Two issues with these panels, but other wise pretty nice

Issue #1 - missing 2 bolts for a hardtop install. They promptly sent me 2 additional bolts, but it seems these bolts are not included by default

Issue #2 - the trim piece does not sit correctly after installing the bottom bracket

Other than that they turned out pretty nice

 

[604Bronco]

Added turnoffroad's rear window Molle panels
https://turnoffroad.com/collections...cts/2021-ford-bronco-rear-window-molle-panels

Two issues with these panels, but other wise pretty nice

Issue #1 - missing 2 bolts for a hardtop install. They promptly sent me 2 additional bolts, but it seems these bolts are not included by default

Issue #2 - the trim piece does not sit correctly after installing the bottom bracket

Other than that they turned out pretty nice

For that trim piece that doesn't fit properly, are you sure it doesn't just need a good smack? I found some of the trim pieces (also in the cargo area) to be a bit finicky and needing some extra love to re-attach properly.

If that doesn't work, if you know what it's being held up on, try notching it out. You should be able to get it to sit properly one way or another.

 

[cr117]

Added turnoffroad's rear window Molle panels
https://turnoffroad.com/collections...cts/2021-ford-bronco-rear-window-molle-panels

Two issues with these panels, but other wise pretty nice

Issue #1 - missing 2 bolts for a hardtop install. They promptly sent me 2 additional bolts, but it seems these bolts are not included by default

Issue #2 - the trim piece does not sit correctly after installing the bottom bracket

Other than that they turned out pretty nice

You’re going to have to trim them a bit to get them to sit flush.

 

[jsoa]

For that trim piece that doesn't fit properly, are you sure it doesn't just need a good smack? I found some of the trim pieces (also in the cargo area) to be a bit finicky and needing some extra love to re-attach properly.

If that doesn't work, if you know what it's being held up on, try notching it out. You should be able to get it to sit properly one way or another.

oddly enough the driver side, (with a little effort) attaches fine, The passenger side, I cannot get both sides to clip in. The bottom mounts on this kit can be flexed, I might try to bend them ever so slightly to get the panels to sit properly.

At the end of the day, you can hardly tell unless you are looking for it, so not a big deal, thanks for the tip

 

[jsoa]

You’re going to have to trim them a bit to get them to sit flush.

Ah yea, that is another option I could do, thanks for sharing

 

[Callelk]

Added turnoffroad's rear window Molle panels
https://turnoffroad.com/collections...cts/2021-ford-bronco-rear-window-molle-panels

Two issues with these panels, but other wise pretty nice

Issue #1 - missing 2 bolts for a hardtop install. They promptly sent me 2 additional bolts, but it seems these bolts are not included by default

Issue #2 - the trim piece does not sit correctly after installing the bottom bracket

Other than that they turned out pretty nice

Can I ask what you used to mount your ext?

 

[jsoa]

Can I ask what you used to mount your ext?

I used H3R Extreme Duty Flat Surface Brackets with their Bracket Backing Plates

https://www.h3rperformance.com/products/extreme-duty-fire-extinguisher-brackets-for-flat-surfaces
https://www.h3rperformance.com/products/fire-extinguisher-bracket-backing-plates

 

[Callelk]

I used H3R Extreme Duty Flat Surface Brackets with their Bracket Backing Plates

https://www.h3rperformance.com/products/extreme-duty-fire-extinguisher-brackets-for-flat-surfaces
https://www.h3rperformance.com/products/fire-extinguisher-bracket-backing-plates

Cool, thank you....

 

[RoLyMa27]

Took Pokey out to Rock Candy Mountain to stretch his legs

Coming down this trail in Baja Mode got a notice that my passenger rear was losing pressure. Found a spot to turn around and found a flat spot to put the spare on

good news, if you were wondering is that the scissor jack did its job perfectly. Bad news is now I’m waiting at the tire shop for the repair. TPMS in the spare did not work correctly, so I will need to check into that but all in all not too bad of a day………

Looks like Pokey is in search of Gumby.

 

[cynicalrider]

Added turnoffroad's rear window Molle panels
https://turnoffroad.com/collections...cts/2021-ford-bronco-rear-window-molle-panels

Two issues with these panels, but other wise pretty nice

Issue #1 - missing 2 bolts for a hardtop install. They promptly sent me 2 additional bolts, but it seems these bolts are not included by default

Issue #2 - the trim piece does not sit correctly after installing the bottom bracket

Other than that they turned out pretty nice

You’re going to have to trim them a bit to get them to sit flush.

If it is taking advantage of the soft top mounting points which it looks like it partially does, the soft tops have different trim that are notched out already.

 

[Acadist]

Looks like Pokey is in search of Gumby.

Gumby was the first Ranger I bought……way back when in the 80s

 

[Shawn_1121]

installed. AAL Spare Tire Mount + Oracle Brake Light Ring + @DoYouBronco / HammerBuilt Tailgate Reinforcement. Added Roam 95L with Mounts and MaxTrax

 

[gaaangs]

Swapped out the stock silver Badlands wheels with Wildtrak wheels I got from someone on this sub.

Blacked out Bronco and Ford logo. And new trailer hitch.

These wheels are 1000x better than those awful stock Badlands ones. Now I just need to wash her up, it's been awhile and she's a mess.

Sponsored