Good to know this. Thank you! Did you add the blue and silver stuff? Or just the blue? Now I have another project.Added some sound deadening to the doors. Huge difference in the sound when they are closed.will do back panels and floors later.
![]()
![]()
This is great. Nice work.Built a Hi-Lift mount for my Turn Offroad Tire Carrier! Thanks @Turn Offroad for giving us the provision to do such things!
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Very happy how good it looks today completed now!! Might try shaving in the mirrored finish as well!Day two of prep for Ceramic Coatingβ¦
Cant wait till its all finishedβ¦
![]()
![]()
Is there a reason you are that concerned with rear diff fluid temps enough to put a probe in?I'm going in gals and guys...
- Transmission filter and fluid change + PPE deep transmission pan is the main objective today.
-------------------------------------
If time today (if not during the weekend):
- Transfer case fluid change
- Rear axle fluid change (I need to pull my Ford Performance cover to drill and tap for a temperature probe, so I'll reinstall the stock cover temporarily).
- Engine oil and filter change
I will create a detailed post as per usual when completed with the transmission work.
@redone17 + @Dorf2point0
![]()
Yep; the D44 Advantek under our Bronco is the exact same one (except for mounts) that is under the Wrangler. Here is the rear axle temperature at 75MPH UNLOADED at 95Β°F ambient temperatures with stock 33" tires and stock 4.10 gearing, just driving down the highway in the 2019 Wrangler that I sold to get into a Bronco.Is there a reason you are that concerned with rear diff fluid temps enough to put a probe in?