YesMax setting 6 on the 6112s?
Sponsored
YesMax setting 6 on the 6112s?
Looking good, Lance. Thanks for sharing!
Thanks for the love. If I’m not mistaken, the ‘22 Badlands Sasquatch did not come with the crash bars. All I’m running is a 1/4” spacer (or 6mm) with the KM3s on stock Sasquatch wheels. We’ve taken it out several times with no issues.So no rub with the crash bar mounts not removed? What spacers did you use?
This is a good look.
Thank you. You are correct there is not a crash bar, but there is a crash bar mount that is pointless.Thanks for the love. If I’m not mistaken, the ‘22 Badlands Sasquatch did not come with the crash bars. All I’m running is a 1/4” spacer (or 6mm) with the KM3s on stock Sasquatch wheels. We’ve taken it out several times with no issues.
This is what I’m running. 12k miles with no issues. Hope this helps.Thank you. You are correct there is not a crash bar, but there is a crash bar mount that is pointless.
Did you use a hub centric spacer or one that just slides over the lugs? I was looking at the link below as they were the only ones that i have found so far that are 1/4” hub centric.
https://garageline.com/2021-2023-br...wVkVHq4BoCzpQQAvD_BwE#/spacers_size-15mm_pair
Thank you for the clarification.
Thank you.This is what I’m running. 12k miles with no issues. Hope this helps.
VLAOSCHI Forged 6x5.5 6x135 6x139.7 Universal Wheel Spacers 1/4 Inch (6mm) Compatible with Chevy Ford-Toyota 6 Lug for Silverado Sierra 1500 | 2004-2022 F150 | 4Runner Tacoma (6Lug Only) - Pack of 4 https://a.co/d/cZJSRvY
Looking good, Lance. Thanks for sharing!
I love that build!I’ll play… ‘23 WildTrak
ADS Adj. coil overs @ 2.25” front/1.5” rear and .25” rake. - Talk to @Shifts And Grins Fab
Vorsteiner 17” VR-601BL +0mm offset
37x12.5 Mickey Thompson Baja Boss A/T
I may end up cranking up the rears 2 turns for another .25” as I sag .25” FULLY loaded up for camping etc.
Crashbar mounts (no bars since WT) have not been cut/modified and I DO get a slight rub on crashbar mounts fully flexed (swaybars connected) and steering fully locked. This is the only time and I’ve done quite a lot, even some mild jumping, and no issue otherwise. I may do some minor notching on those mounts at some point, but not a big issue currently.
Nice. Are you completely level? I have a 1” leveling kit and am still half inch lower.37 inch KO2's, Wildtrak, 1.5" RPG collar on front, nothing on back, 1 inch wheel spacers. Plenty of clearance.
Do you have pictures of this gap?It is the ADD Stealth fighter bumper. I do have some buyers remorse due the huge gap between the bumper and the body. Was not aware of that or I would have went with something else.