DV8 Offroad | High Clearance Rear Bumper

[DV8offroad]

2021-22 FORD BRONCO | FS-15 SERIES REAR BUMPER​

The FS-15 Series Bronco Rear Bumper was designed to maximize ground clearance when taking your Bronco off-road. It provides superior rear-end protection while closely following the factory body style and contours. The license plate mount is located above the bumper and includes an LED plate light. Up to a 37-inch spare tire mounted on the OEM carrier will fit above the bumper.

Two 3-inch flush mount pod lights can be installed towards either side of the bumper to provide supplemental trail lighting. Alternatively, they can be wired together and work in tandem with your reverse lights. Two reinforced clevis mounts that take ¾-inch D-ring shackles provide recovery options during your off-road adventures.

Our high clearance Bronco bumper is constructed of 3.5mm steel plating with 5mm steel supports, and then finished in a finely textured black powder coat to protect against rust.

Check out the brand new FS-15 Rear Bumper here: https://dv8offroad.com/products/high-clearance-bronco-rear-bumper

Key Features:

• Higher Than Factory Ground Clearance
• 3.5mm Steel Plates with 5mm Steel Supports
• Micro Texture Black Powder Coat
• Accepts Two, 3” Flush Mount LED Pod Lights
• Dual Clevis Mounts for ¾” D-Ring Shackles
• Retains Factory Backup Sensors
• Accommodates up to 37" Spare Tire

Visit https://dv8offroad.com/pages/ford-bronco-bumpers-and-accessories to shop all of our Ford Bronco Parts and Accessories.
Plus... use code "ForumMember" at checkout for 10% off!​

Sponsored

 

[Bronc-Itus]

She’s a beaut! Always like the underside peeking out a bit

 

[GloNDark]

That is a great looking bumper!! What's the leadtime on that thing currently?

 

[Aztec1382]

Nice

 

[DV8offroad]

That is a great looking bumper!! What's the leadtime on that thing currently?

In stock and ready to ship!

 

[ironmike]

@DV8offroad Will this product fit the Bronco Raptor?

 

[DV8offroad]

@DV8offroad Will this product fit the Bronco Raptor?

We have yet to get a Bronco Raptor into our facility to take measurements and test.
Do you have one?

 

[ironmike]

We have yet to get a Bronco Raptor into our facility to take measurements and test.
Do you have one?

Won’t have mine until the Aug/Sep timeframe

 

[mrconns]

Does it accomodate the oem tow receiver?

 

[StoicAF]

Do you have any pics w the tail gate open? I have seen some bumpers leave a gap. I’m not a fan of that.

 

[redone17]

This has been #1 on my list. Just have to swallow the pill and accept the license plate hanging off the side.

Any pics with tow package?

 

[DV8offroad]

This has been #1 on my list. Just have to swallow the pill and accept the license plate hanging off the side.

Any pics with tow package?

Hey there, some people don't like the license plate bracket that is included, but hey that's okay! It's completely optional and you don't have to install it there. You can order this instead: https://dv8offroad.com/collections/...-bronco-rear-license-plate-relocation-bracket

 

[redone17]

Hey there, some people don't like the license plate bracket that is included, but hey that's okay! It's completely optional and you don't have to install it there. You can order this instead: https://dv8offroad.com/collections/...-bronco-rear-license-plate-relocation-bracket

Yeah, I saw that one too. Personally, for the effort involved for that install - I thought I preferred the one that comes with the bumper and not having the plate protrude off of the tailgate when it’s open. But, perhaps not. I wish I could see both in person.

The plate relocation has been the only thing holding be back…but, that’s the dilemma when you want to be high and tight! You’ve done a great job tackling this conundrum.

 

[Nick@ApolloOffroad]

Yeah, I saw that one too. Personally, for the effort involved for that install - I thought I preferred the one that comes with the bumper and not having the plate protrude off of the tailgate when it’s open. But, perhaps not. I wish I could see both in person.

The plate relocation has been the only thing holding be back…but, that’s the dilemma when you want to be high and tight! You’ve done a great job tackling this conundrum.

Truth be told, the installation really isn't that bad. We did the MTO bumper on the rear of ours because we anted the custom finished accent panels. You're already having to cut and splice the factory wiring for the included DV8 plate light, so this is just a couple extra bolts and some wire length to get it done. If you can install the bumper and wire the lights up, then the plate upgrade is definitely a doable DIY.

 

[redone17]

Truth be told, the installation really isn't that bad. We did the MTO bumper on the rear of ours because we anted the custom finished accent panels. You're already having to cut and splice the factory wiring for the included DV8 plate light, so this is just a couple extra bolts and some wire length to get it done. If you can install the bumper and wire the lights up, then the plate upgrade is definitely a doable DIY.

Ah. I assumed the one that comes with the bumper just plugs into the factory wiring which is in that same corner. I guess I shouldn’t assume.

I’m gonna pull the trigger on this setup soon. Birthday present to myself?

Sponsored