Show us your installed wheel / tire upgrades here! (Pics)

[JDoc92]

Anybody tried/succeeded to use these Badlands wheels on either 35s or 37s? What size spacer and lift did it require?

On a different thread…

Sponsored

 

[2112]

Nice Which tires do you have? NITTO Trail Grapplers?

Here is the poke with my RTR wheels. (NO Spacers). - I will be adding 1 inch spacers though after I get my Trail Grapplers, unless you do have Trail Grapplers and then I wont need to.

Toyo Open Country 35 x 12.50” which are 13.2“ wide at the sidewall..

I don’t have pictures yet. They rub on the IAG mudflaps I have installed. I will trim the mudflaps and install 1.5” SVC perch collars.

Will have pictures up when everything is together.

 

[Ford Motor Company]

RTR EVO 6 - 17in. -0 Offset. (no spacers)

That's a stunning Bronco, Pat!

 

[Ford Motor Company]

23 Badlands - non SAS
Wheels - RTR 17" x 9 EVO 6 +30 offset wheels in satin charcoal
Tires 315/70/17 KO2 C rated tires

That's a beautiful blue Bronco, Kevin!

 

[youloze]

Just bought my 2023 Black Diamond last weekend. Installed a Zone 4" lift yesterday and had the wheels/tires put on yesterday as well. Loving it so far.

Fuel Shok 665 wheels with BFG KM3s on Zone 4" lift.

It's strange though, the rear is not level with the front. Lift was installed correctly and I didn't run into any issues during install. Also not my first rodeo installing suspension by a long shot. Anyone else with a Zone 4" have this issue?

 

[Discount Tire]

Just bought my 2023 Black Diamond last weekend. Installed a Zone 4" lift yesterday and had the wheels/tires put on yesterday as well. Loving it so far.

Fuel Shok 665 wheels with BFG KM3s on Zone 4" lift.

It's strange though, the rear is not level with the front. Lift was installed correctly and I didn't run into any issues during install. Also not my first rodeo installing suspension by a long shot. Anyone else with a Zone 4" have this issue?

Gorgeous

 

[youloze]

Gorgeous

Thanks! I purchased the wheels and tires from Discount Tire in Cary, NC. Everyone was fantastic to deal with.

 

[Discount Tire]

Thanks! I purchased the wheels and tires from Discount Tire in Cary, NC. Everyone was fantastic to deal with.

That's so great to hear - thank you for your business!

Also, just noticed you recently signed up - welcome to the forum

 

[youloze]

That's so great to hear - thank you for your business!

Also, just noticed you recently signed up - welcome to the forum

Thanks!

 

[Snacktime]

It's strange though, the rear is not level with the front. Lift was installed correctly and I didn't run into any issues during install. Also not my first rodeo installing suspension by a long shot. Anyone else with a Zone 4" have this issue?

Give it a few days and some speed bumps. The front most Likely hasn't settled back in. Did you tightened everything with the suspension hanging? The a-arm bushing can give you some lift and will go away with driving.

 

[youloze]

Give it a few days and some speed bumps. The front most Likely hasn't settled back in. Did you tightened everything with the suspension hanging? The a-arm bushing can give you some lift and will go away with driving.

No sir, tightened all bushing components while loaded on the ground. I'm hoping the front will settle, but I wasn't sure since it measured exactly 4" height difference after the lift. Time will tell!

Thanks!

 

[zuke]

No sir, tightened all bushing components while loaded on the ground. I'm hoping the front will settle, but I wasn't sure since it measured exactly 4" height difference after the lift. Time will tell!

Thanks!

My zone 3" was 1/2 higher in the front until I installed an after market bumper and winch, then it leveled out..

Now you have an excuse to buy a bumper and winch

 

[youloze]

My zone 3" was 1/2 higher in the front until I installed an after market bumper and winch, then it leveled out..

Now you have an excuse to buy a bumper and winch

Haha stop it! I've spent enough already and still have a lot more I want to buy

 

[JonDW29]

My zone 3" was 1/2 higher in the front until I installed an after market bumper and winch, then it leveled out..

Now you have an excuse to buy a bumper and winch

 

[Teghogh]

Black rhino Br004 20 offset on ko2s

Sponsored