Plug and Play Fog Lights

[mannyjag]

I know this questions has been asked plenty of times. Just bought a Mod Bumper from another Bronco owner and I would like a list of aftermarket fog lights that are plug and play to my factory fog light switch. Links to other pages are welcome. I've been looking at the following:

https://www.roughcountry.com/ford-b...html?find=2022-ford-bronco-4wd-856075#280=709

https://www.4wheelparts.com/p/oracle-lighting-led-fog-light-kits/prod9690002

Just not certain if they are plug and play or if I need to buy a separate harness.

Thank you in Advance!

Sponsored

 

[da_jokker]

You can buy the plug adapter for less than $20 which makes pretty much any fog light plug and play.

Just make sure not to buy fog lights that are so powerful they take too many amps.

FYI, I purchased Amazon plug adapters and fog lights for 35 bucks and they are plug and play

 

[JTK37]

I went with Diode Dynamics SS3 Pros that I got from @4x4TruckLEDs.com with their harness the electrical connections were literally plug and play with the stock fog wiring(I have a Wildtrak with the std bumper).

 

[4x4TruckLEDs.com]

Grab one of our kits here: https://www.4x4truckleds.com/vehicle-specific/ford-bronco/2021-bronco/fog-lights/

We also offer pigtails depending on your light setup for 1 pair of lights going to factory switch

 

[foremi]

As other have said 4x4truckleds has adapters for most of the popular aftermarket pod lights and I have them for the diode dynamics pods.

I would be careful with some of the brackets from 4x4truckleds though... the KR offroad bracket I have (picture attached) does not allow you to properly aim the pods because the surrounding bezel severely limits how you can aim them. My Fogs are pointed at the sky if they are actually "in" the bezel so they have to be moved behind it and it looks aweful imo.

I would also be careful about the power draw of the fogs you wire to the factory fog lights wiring. The factory ones are not very powerful so you probably shouldn't attach 2x 40w pods to them.

 

[cyberfalco]

I bought the Rigid kit. I am a long time fan of Rigid. The SAE fogs are connected to the factory fog light switch using an adapter from 4x4TruckLEDs. The other four are wired to Aux switch 6.

 

[Thart89]

Grab one of our kits here: https://www.4x4truckleds.com/vehicle-specific/ford-bronco/2021-bronco/fog-lights/

We also offer pigtails depending on your light setup for 1 pair of lights going to factory switch

Any plans to make fog light kits for the capable bumper with round lights? I see you have some with square lights but really like the idea of keeping all the lights round.

 

[4x4TruckLEDs.com]

Any plans to make fog light kits for the capable bumper with round lights? I see you have some with square lights but really like the idea of keeping all the lights round.

We already sell a kit:

https://www.4x4truckleds.com/diode-...-fog-lamps-2021-ford-bronco-2019-ford-ranger/

We know these fit.

Otherwise, we don't plan to make a whole new kit just to change the bezels to round on our dual kit, sorry. It's not worth it. Also the round would not fit. And going to 1 single light... honestly no real sense since Diode already makes a kit that MIGHT fit (we tested it, it's tight, but it's also tight on the plastic bumper)

https://www.4x4truckleds.com/diode-...-for-2021-ford-bronco-plastic-capable-bumper/

 

[MudMonsterRacin]

Any plans to make fog light kits for the capable bumper with round lights? I see you have some with square lights but really like the idea of keeping all the lights round.

I ordered diode dynamics elite series. The replace the factory fogs. Haven't installed them yet but they look like they're a lot brighter than factory. Waiting for the weather to break.

 

[Thart89]

We already sell a kit:

https://www.4x4truckleds.com/diode-...-fog-lamps-2021-ford-bronco-2019-ford-ranger/

We know these fit.

Otherwise, we don't plan to make a whole new kit just to change the bezels to round on our dual kit, sorry. It's not worth it. Also the round would not fit. And going to 1 single light... honestly no real sense since Diode already makes a kit that MIGHT fit (we tested it, it's tight, but it's also tight on the plastic bumper)

https://www.4x4truckleds.com/diode-...-for-2021-ford-bronco-plastic-capable-bumper/

Thanks for the quick response. That makes sense just wasn't sure if 2 round lights could be squeezed in or not. Thanks anyway

 

[mannyjag]

You can buy the plug adapter for less than $20 which makes pretty much any fog light plug and play.

Just make sure not to buy fog lights that are so powerful they take too many amps.

FYI, I purchased Amazon plug adapters and fog lights for 35 bucks and they are plug and play

Can you share the link to the plug adapters on Amazon?

TIA

 

[mannyjag]

I bought the Rigid kit. I am a long time fan of Rigid. The SAE fogs are connected to the factory fog light switch using an adapter from 4x4TruckLEDs. The other four are wired to Aux switch 6.

Thanks for the input! Do you have a link to the lights from Rigid?

 

[cyberfalco]

Thanks for the input! Do you have a link to the lights from Rigid?

Well, the price just went up. Here they are though https://www.rigidindustries.com/2021-bronco-mod-bumper-triple-sr-m-fog-light-kit-46731.html

Search around. You may still find them at the old prices. I did.

 

[4x4TruckLEDs.com]

Well, the price just went up. Here they are though https://www.rigidindustries.com/2021-bronco-mod-bumper-triple-sr-m-fog-light-kit-46731.html

Search around. You may still find them at the old prices. I did.

For 1/2 that price you can get a USA made kit from us at 4x4TruckLEDs.com - Yeesh

 

[4x4TruckLEDs.com]

Can you share the link to the plug adapters on Amazon?

TIA

They are on our website: https://www.4x4truckleds.com/installation-accessories/switches-harnesses/

Sponsored