12/12/2022 build week with spreadsheet

[huey]

So far no modules have popped up, no assembly line photo, and no change in status on the tracker for mine.

assuming ewebster was the last truck blended on 12/15 & using the "confirmed" math above that would mean the last blended truck today is #6035. There is lots of wiggle room here so it is likely @bclark80 could be blended later today. Very least is is early tomorrow. Keep an eye out!

Sponsored

 

[Ewebster]

so I pulled some data from this thread/spreadsheet and here is what I am seeing

confimred builds(ok trucks with modules)
Lox has a blend date of 12/12 & rotation # 3748
Ewebster has a blend date of 12/15 & rotation # 5463

this works out to roughly 572 / day confirmed trucks built

unconfirmed builds (pulled from spreadsheet)
greyz has a blend date of 12/12 & rotation # 3415
blclark80 has a blend date of 12/15 & rotation # 6049

this works out to roughly 878 / day unconfirmed but as per ford schedule
this number was based on lowest 12/12 blend & rotation # & highest 12/15 blend & rotation #

looks like mine will be blended late Saturday if they keep up the pace to Fords schedule
of course there are many variables here & I don't know the true first / last number confirmed built each day. Assuming they don't run Sunday I may not get blended till Monday the 19th(my rotation # is 7173) . Cutting it close for the subwoofer to get installed, but my window sticker does not include the delete so I am hoping I get it.

Great write up. Do remember tho that they will be shutdown for 2 weeks as well.

 

[GreatDaneMom]

did you find out any specifics on what chips were holding you back?

Unfortunately, no, although there were a lot of theories. And I kept getting different info every time I checked with chat. One rep would tell me there were no delays or holds, and another would say there's a chip hold. The "ETA" dates they told me stayed the same... Dec 10-16. But then one rep would say those were the delivery dates, another would say those were the dates to resolve the chip hold, and yet another would say those dates don't mean anything at all since it was on chip hold. Once it was actually built (and I did get 'built' and 'shipped' emails but no baby pic yet) the new EDD dates of Jan 1 - Jan 7 made more sense. That's why I say take what you're hearing from chat with a grain of salt and hang on for the ride...

EDIT: My modules popped a couple of days after my blend date. Again, keep in mind that's the date the body meets the chassis... the truck isn't technically "built" then. Could be on chip hold after that. Or might need to go to the mod shop for things like roof racks, tow package, etc. My blend date was 11/16. It wasn't built until 12/12. And it shipped on 12/15.

 

[Cbroncox]

Got a tear tag value now. Spreadsheet updated!

 

[Ewebster]

I have modules! I also have a tear tag value. Does anyone know what a tear tag is and what its significance of have a value for it?

The Tear Tag is the catch code or strategy for your PCM when it’s flashed and usually signals the near completion, if not completion of your Bronco.

 

[scottfwalter]

The Tear Tag is the catch code or strategy for your PCM when it’s flashed and usually signals the near completion, if not completion of your Bronco.

I guess I’m off to the mod shop to get the roof rails installed.

 

[Ewebster]

Got a tear tag value now.

Same! Had to refresh and it popped up along with like 100 more modules.

 

[bclark80]

assuming ewebster was the last truck blended on 12/15 & using the confirmed math above that would mean the last blended truck today is #6035. There is lots of wiggle room here so it is likely @bclark80 could be blended later today. Very least is is early tomorrow. Keep an eye out!

Man I keep refreshing every 30 minutes! Thanks for the glimmer of hope. I'll let y'all know when it comes alive!

 

[khudgi]

Anyone know if there is a trick to using https://palsapp.com it asks for a log in?

 

[orange_methodology]

I just checked again, and I now have my tear tag value.

 

[MichiganMichael]

My sales guy said Ford told them my Bronco will be delivered to them tomorrow…. I think thats a stretch tracker still shows in production, modules on, and a tear tag. At least I know its built and will likely get it in the next month or two.

Having a damn near identical build, and us going down the line around the same day makes me hopeful. Where are you located? roughly is fine. I'm only 2 hours from MAP, so I'm still hopeful for pre-Christmas.

Although, we all know how reliable "My Dealer Said...." is.

 

[khudgi]

Having a damn near identical build, and us going down the line around the same day makes me hopeful. Where are you located? roughly is fine. I'm only 2 hours from MAP, so I'm still hopeful for pre-Christmas.

Although, we all know how reliable "My Dealer Said...." is.

My dealer is 8 miles from MAP in Dearborn, I am in Ann Arbor.

 

[MichiganMichael]

My dealer is 8 miles from MAP in Dearborn, I am in Ann Arbor.

Grand Rapids here.... Maybe I'll get lucky and they'll drop yours off and then head over to my dealer.

 

[khudgi]

Grand Rapids here.... Maybe I'll get lucky and they'll drop yours off and then head over to my dealer.

I like the way you think!!!

 

[MichiganMichael]

I like the way you think!!!

Got to be hopeful!

I just got off the Ford chat, and they couldn't give me any additional info over what the tracker has. Which still shows in production. Although the agent did tell me that it has been produced, with an ETA of 12/21 to 12/27. but we all know how reliable that is.

Sponsored