What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[ToddLabbq]

The license plate illumination isn't apparent in the picture. Does it shine from the bottom or the top? Or is it not even present making it not compliant?

There are 2 small led,s on the top of the plate where the top screws would go and when on at night there is plenty of illumination

Sponsored

 

[‘21OBX]

Yesterday we took my wife’s out.

 

[JimmyG]

Started hockey season in style. 2-door Big Bend fits my equipment bag without folding down the rear seats- another reason I chose it over a 2-door Wrangler.

Hockey dude! Right on!

 

[joeb]

Yesterday we took my wife’s out.

Very Nice!

Do you have Stock Rear Bumper? I noticed 2 Red recovery points -' I think. Maybe I'm wrong. What bumper and/or where did you get those recovery hooks

Thanks

 

[jjack50]

Put on my new plate!

 

[DocFuller]

Managed to get my fog lights installed! After customizing the wiring harness to work with the factory fog switch I ran into some trouble (and made the rookie mistake) of not testing prior to installing. Tore everything down and apart, got to testing and found the harness came from 4x4 with two pins put in the wrong location which led to the dead lights!

got it all sorted out and swapped the pins to the right spot, tested, and boom we have light! Just need to head back into Forscan and turn on the dash light when thefogs are on, other than that under th hoods complete for now!

 

[‘21OBX]

Very Nice!

Do you have Stock Rear Bumper? I noticed 2 Red recovery points -' I think. Maybe I'm wrong. What bumper and/or where did you get those recovery hooks

Thanks

Stock bumper the bolts and holes are there to add a second recovery point. They are stock parts I bought off another member that was selling.

 

[joeb]

Stock bumper the bolts and holes are there to add a second recovery point. They are stock parts I bought off another member that was selling.

Ok. Thanks

 

[CartierChiro]

Are there any threads on turbos specifically or have any of you upgraded your turbo at all? Looking for more info on that and how to take the limited off my car if possible in forscan.

 

[gracebal]

Been working steady on the red sticker fab to carbon change out. Loving how much is becoming available for us now. Don’t mind the mess. She’s in project mode again til spring.

Where did you get your little Bronco statue on your dash?

 

[Figmo]

Storage is limited... so these Chinese molle panels are cheap and actually are Pretty nice.
No sense paying almost 200 each

Where did you source these?

It has always amazed me the cost of these simple items. Talk about a "Bronco Tax". They are expensive for any vehicle ( "Molle Tax"?) $200 for just a piece of thin sheet metal with slots cut in it with some screws and stand offs? OUCH!

I've often considered marketing precut/powder coated Molle sheets that people can just buy and cut/bend to suit.

 

[Ground_zero298]

Where did you get your little Bronco statue on your dash?

On Etsy. Search bronco buddies. They have all sorts of them.

 

[BMoreDogDoc]

I took delivery!!!! In the pouring rain!!!

 

[equitasforall]

Unfortunately I packaged mine up for long term storage. Heading overseas on assignment for three years. She’ll be waiting for me when I get back. Y’all have fun! Been a blast!

 

[AMTRV]

Unfortunately I packaged mine up for long term storage. Heading overseas on assignment for three years. She’ll be waiting for me when I get back. Y’all have fun! Been a blast!

Take care Jeff…..she’ll be waiting for you!
Thanks for what you’re doing

Sponsored