ERUPTION GREEN Bronco Club

[mikeeshim]

It was fairly simple.
1) Get a FORScan OBD2 adapter. I bought this one instead of wasting money buying the adapters they recommend.
2) Follow the instructions here to get FORScan installed and a temp key. The instructions only show 3 of the modules to backup. Make sure you backup any other modules you are going to modify. For the amber DRL, you will be modifying BdyCM module. You can find the Google sheet for known FORScan mods here.
3) In the BdyCM module, look for the address 726-43-01 and modify the first 2 bytes to 0x0101.
4) Enjoy your beautiful amber DRLs!

Sorry for commenting on this old thread, but I couldn't find the other one.
For 726-43-01, there are 3 boxes.
0202 - 0000 - 0174
Which boxes do I change to 0101?

Thx in advance!

Sponsored

 

[Kristi]

Ordered 12/13/21. Blend 9/13/22. Got the built email yesterday and have an undetermined amount of time in transit by rail car.

Good luck! Hope it comes quick!

 

[NJRoadkill]

Never get tired of seeing EG

 

[thehulk]

Sorry for commenting on this old thread, but I couldn't find the other one.
For 726-43-01, there are 3 boxes.
0202 - 0000 - 0174
Which boxes do I change to 0101?

Thx in advance!

The first set of values (0202). Please note, I did have someone try this on a 2.3 manual and 0101 did not work as expected for them. I'm pretty sure others have had this work fine for them though.

 

[mikeeshim]

The first set of values (0202). Please note, I did have someone try this on a 2.3 manual and 0101 did not work as expected for them. I'm pretty sure others have had this work fine for them though.

So I did that on my FE and I'm still suck with the boring white lights.
Oh well, that you regardless!

 

[Seajay]

Just got a blend date of 10/06. Pretty excited finding this on the backdoor link!

 

[Snacktime]

 

[Administrator]

Tony (@CarbonBronco) excellent 2022 Eruption Green 4dr Base Sasquatch build.

See full build thread @ https://www.bronco6g.com/forum/thre...ruption-green-4dr-base-sasquatch-build.55544/

 

[CarbonBronco]

Tony (@CarbonBronco) excellent 2022 Eruption Green 4dr Base Sasquatch build.

See full build thread @ https://www.bronco6g.com/forum/thre...ruption-green-4dr-base-sasquatch-build.55544/

Thanks boss man!!

 

[mikeeshim]

The first set of values (0202). Please note, I did have someone try this on a 2.3 manual and 0101 did not work as expected for them. I'm pretty sure others have had this work fine for them though.

Soooo, I was driving up to Pismo Beach from LA this past weekend and it was dark when I left. I was driving with cruise control when the sun started to come up, behind a silver minivan. As the auto headlights turned off, I saw in my reflection that the DRLs turned amber.

During a gas stop, I went out to check and to my disappointment, they were white again. At the pump in front of me was white Land Rover, and when I switched to drive, I saw in the reflection that they turned amber again.

Then I remembered that this only works in R and D. So my question now is, HOW did you take a picture of your rig with the amber DRLs on?

 

[thehulk]

Soooo, I was driving up to Pismo Beach from LA this past weekend and it was dark when I left. I was driving with cruise control when the sun started to come up, behind a silver minivan. As the auto headlights turned off, I saw in my reflection that the DRLs turned amber.

During a gas stop, I went out to check and to my disappointment, they were white again. At the pump in front of me was white Land Rover, and when I switched to drive, I saw in the reflection that they turned amber again.

Then I remembered that this only works in R and D. So my question now is, HOW did you take a picture of your rig with the amber DRLs on?

Put in neutral with parking brake on.

 

[mikeeshim]

Put in neutral with parking break on.

Thx again! Didn't know it worked in N, but I'll give it a whirl. I put it in D with the parking brake, but I was too chicken to get out like that.

 

[thehulk]

Thx again! Didn't know it worked in N, but I'll give it a whirl. I put it in D with the parking brake, but I was too chicken to get out like that.

Even in R/D you are not gona move unless you are really on the throttle. Stating this from experience since I've had the car in D with the parking brake on by accident a couple of times. The parking brakes are very strong compared to some other vehicles I've owned/own.

 

[mikeeshim]

Even in R/D you are not gona move unless you are really on the throttle. Stating this from experience since I've had the car in D with the parking break on by accident a couple of times. The parking breaks are very strong compared to some other vehicles I've owned/own.

I actually did that at Off-Roadeo a few times, but it wasn't my Bronco so it didn't feel as sketchy. But again, thank you for the awesome tips. Loving the amber DRLs (that I can't see)!

 

[LuckyNotAccurate]

Good news! I finally have my Eruption Green Bronco [1 : 24]

Painted the Maisto 1:24 scale die cast in the closest thing I could find to Eruption Green. Another little project killing time waiting for my '21 '22 '23 Bronco. Bonus (very) small dog for scale.

Sponsored