What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[airforceteacher]

Cheapo Amazon slides - honestly after doing this would recommend something higher quality, I had a few of the bearings come loose, I popped him back in and tighter back down but doubt they’ll last. I will be replacing. I like that they lock in place, that function is super tight. This was a much bigger project than I anticipated

I see the blue handles poking through - I assume those are the lockers, press down to open?

Sponsored

 

[MannyG20]

Changed out the OEM BL grille with a matte black Xipex grille and installed the matte black Oracle amber backlit letters.
as usual I can’t do a project without at least one oppsie- I installed the letter ‘N’ upside down.

 

[j_marinelli]

Ran my sun shade for the first time.

and picked up a new yeti cup to match my area 51

 

[Browp24]

Changed out the OEM BL grille with a matte black Xipex grille and installed the matte black Oracle amber backlit letters.
as usual I can’t do a project without at least one oppsie- I installed the letter ‘N’ upside down.

Hey,

I did the same exact thing with mine. Just be careful because mine had two little open slots that were now facing up. I washed my car then went to drive it and the N burnt out and started smoking

 

[MannyG20]

Hey,

I did the same exact thing with mine. Just be careful because mine had two little open slots that were now facing up. I washed my car then went to drive it and the N burnt out and started smoking

I was thinking about filling in the two slots, now I am for sure going to do that. Thanks for the heads up.

 

[Lsm7581]

I see the blue handles poking through - I assume those are the lockers, press down to open?

Yes, those are part of the slides. Press down to pull them out

 

[Jmor]

Rainbow Falls trail
Pike National Forrest Colorado

 

[FerkinBlonco]

Added rear seat ventilation for puppy passengers…

 

[heelyeah]

Ran my sun shade for the first time.

and picked up a new yeti cup to match my area 51

I've been wondering how close of a match this is! Pretty close in person? I've got a cup on order, was thinking about getting a roadie cooler too.

 

[contented]

Wrapped up onboard air and gave it a test. A bit over six minutes from 17 psi to 39 psi.

 

[j_marinelli]

I've been wondering how close of a match this is! Pretty close in person? I've got a cup on order, was thinking about getting a roadie cooler too.

Close enough of a match considering yeti is matte finish.

 

[DaveInSA]

Installed BadAss Tents wind deflector for OEM rails.

It really helps with the wind buffeting noise from the yakima platform. Dunno about gas mileage yet, but meh, it's a Bronco

 

[MillerAndCheeto]

Wrapped up onboard air and gave it a test. A bit over six minutes from 17 psi to 39 psi.

Which winch is that? Factory bumper?

 

[contented]

Which winch is that? Factory bumper?

Winch is a Warn VR EVO 12S. Yup, factory optioned mod bumper w/ the Rough Country winch mount. I have the Lux package and wasn't willing to give up adaptive cruise. Moved the camera using JCR's relocation kit.

Sponsored