What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Foxguy]

Did it leave much adhesive residue? If so what did you use to clean it off? I've seen people mention Goo Gone before but that seems harsh to me.

Those wheels are amazing. If we weren't going Sasquatch they would be on the radar for sure.

Use a product called ACRYSOL it won’t damage finish. Takes off any mastic.
I believe it’s from a company called KENT INDUSTRIES .

Sponsored

 

[old goat]

BRONCO ON THE WAY , BB , HPR 2DOOR , I ordered 5 new Cooper tires 275/70/18 AT3 XLT , for the OBX wheels I have waiting .

 

[thatspecialbeat]

I deleted the tow package to get a faster build date.

Installed the Rough Country hitch off Amazon.

Super easy to pull off the bumper and install.

 

[Murraydog11]

I put my glove box organizer in, and I made a few Forscan changes...

 

[2PT7]

Installed lighting in the trunk. Even during the day you can already see a difference

will take pictures tonight

 

[dgorsett]

Yes it is. I just followed the instructions for the mod bumper but applied them to the capable bumper. It only mounts to the frame bolts that are obviously in the same spot regardless of bumper. I had to move the sensors just like you would with the mod bumper. The plastic bolt covers have to be cut on either bumper so I just cut it off with a sawzall right at the edge of the joint to the outside pieces and snapped them in place. That part is actually easier than on the mod bumper. I can probably send you pictures of that if you need them but for everything else just follow the instructions for the mod bumper.

Photos would be nice, and do you 'spose installation on a standard bumper would work as well?

 

[shawn6107]

Photos would be nice, and do you 'spose installation on a standard bumper would work as well?

There are photos on my original post in this thread and on my build thread. I don’t know a lot about the plastic bumper but as long as it bolts onto a really solid piece of steel under the plastic caps where it mounts to the frame there’s no reason it shouldn’t. You would have to cut the plastic caps to fit around the mount. This mount basically just mounts to the bumper frame bolts (4 inside bolts) and nowhere else on the bumper. I would think those would be the same across the board but I found out the hard way that the sensors, sensor clips, and wiring harness all vary wildly between the bumpers which was surprising to me.

 

[JonDW29]

Installed lighting in the trunk. Even during the day you can already see a difference

will take pictures tonight

Is this just on the back window lift gate? Any details would be nice. I was putting in my Rockworx top bolts last night and it was way too dark back there. Overall the internal light in this truck is lacking IMO.

 

[2PT7]

Is this just on the back window lift gate? Any details would be nice. I was putting in my Rockworx top bolts last night and it was way too dark back there. Overall the internal light in this truck is lacking IMO.

Yup! lights stick on glass and theyre just plug and play

 

[Ksjrb03]

Is this just on the back window lift gate? Any details would be nice. I was putting in my Rockworx top bolts last night and it was way too dark back there. Overall the internal light in this truck is lacking IMO.

Lacking is an understatement. I lit my bitch up.

Additional Cargo Area Lighting DIY - Done | Bronco6G - 2021+ Ford Bronco & Bronco Raptor Forum, News, Blog & Owners Community

 

[dgorsett]

There are photos on my original post in this thread and on my build thread. I don’t know a lot about the plastic bumper but as long as it bolts onto a really solid piece of steel under the plastic caps where it mounts to the frame there’s no reason it shouldn’t. You would have to cut the plastic caps to fit around the mount. This mount basically just mounts to the bumper frame bolts (4 inside bolts) and nowhere else on the bumper. I would think those would be the same across the board but I found out the hard way that the sensors, sensor clips, and wiring harness all vary wildly between the bumpers which was surprising to me.

Thanks, I went back to your op, looks good. I've mounted shackle mounts in there already so I think they are the same mounting bolts. Hardest part may be trimming the plastic caps look good

 

[grayshadow]

Drove up Mt. Washington

 

[BroncoSarge]

Finally mounted the flag, pole and mount.

 

[Jmor]

Mount Rushmore South Dakota

 

[Jbatey84]

I posted this in the 2 door thread, but for people that don't frequent it, I finished up my rear seat delete today. I have a few minor things to add like tie downs but I think it came out really good.

Any details you can provide?

Sponsored