Anyone know what these are called?

[BiggieStallz]

Just pressure. They are working out just fine btw.

Thanks. Will be trying that out today.

Sponsored

 

[ShockerRacing]

How were they secured? Bolted in or a pin of some sorts?

It’s a plastic clip with a plastic screw in the center. They are terrible because the plastic screws won’t unscrew. Had to drill the head off of one of them to remove it and now I need to find a replacement.

 

[equitasforall]

It’s a plastic clip with a plastic screw in the center. They are terrible because the plastic screws won’t unscrew. Had to drill the head off of one of them to remove it and now I need to find a replacement.

Good to know. Thanks for the info! Much appreciated!

 

[zane8stacks]

It’s a plastic clip with a plastic screw in the center. They are terrible because the plastic screws won’t unscrew. Had to drill the head off of one of them to remove it and now I need to find a replacement.

do you have a part number on a replacement?

 

[Dusmw]

Would these work?

https://www.quadratec.com/p/quadratec/tailgate-spare-tire-bump-stop-kit-wrangler-jk-jl

 

[DD214]

It’s a diqfer

 

[EMBronco]

I bought some extended bump stops meant for a Jeep, and then just modified them to work with the Bronco.

 

[AttackGuy64]

It’s a diqfer

Is that like an uppdog?

 

[‘21OBX]

I bought some extended bump stops meant for a Jeep, and then just modified them to work with the Bronco.

Did they Snap in securely?

 

[AttackGuy64]

I bought some extended bump stops meant for a Jeep, and then just modified them to work with the Bronco.

Where did you get those? I need them on my rig.

 

[DD214]

Is that like an uppdog?

must like that…only totally different…nice ride in the background.

 

[EMBronco]

Did they Snap in securely?

No. I cut the nub off the back, trimmed to the right length, then drilled a hole through the center. I then attached it using the hardware from the stock bump stop.

 

[EMBronco]

Where did you get those? I need them on my rig.

Here’s a link to the one’s I bought: https://www.extremeterrain.com/fish...VkTytBh0hiwVREAQYBCABEgJYUvD_BwE&gclsrc=aw.ds

 

[breezyxm]

I bought some extended bump stops meant for a Jeep, and then just modified them to work with the Bronco.

How did you attach them to the tailgate

Sponsored