What did you do TO / WITH your Bronco today? 👨🏻‍🔧🧰🚿🛠

[Lilj4425]

Took my bronco to Mount Arvon, the highest point in michigan...Stupid phone had me go the back way..Im sure it was a goat path that the goats abandoned years ago...

Hopefully you used your GOAT modes on the goat path.

Sponsored

 

[j_4260]

Who did you do the clinic through?

It was through these folks: https://espritdefour.club/ Super friendly and knowledgable bunch! Learned a lot and I highly suggest joining a clinic if you can!

 

[Sav426]

Response 2

Nothing since mine isn't built or have a Vin number etc. I'm living through you all !! Woohoo!!

Ill post a response number every time I reply here. Lets see if it gets to triple digits haha.

Hope all you lucky SOB's are enjoying your Bronco's

 

[Tork]

I introduced the kid to his grandpa. They get along great.

 

[TenSeven]

Installed all the hitch / tow capability I will ever need:

 

[Elonmsk]

Installed our Gobi racks.

 

[Hellion10]

After going back and forth on a couple options, I decided on an Array of Morimoto 4-Bangers for my "fogs". Splurged a little, but well worth it, completes my front end I believe (until somebody comes out with cool sheeetttt) lol. Easy install, well engineered and even the packaging is ridiculously awesome. Comes with a nice harness that with basic understanding of the Upfitter switches was easy to adapt and install. Highly recommend.

 

[JonDW29]

After going back and forth on a couple options, I decided on an Array of Morimoto 4-Bangers for my "fogs". Splurged a little, but well worth it, completes my front end I believe (until somebody comes out with cool sheeetttt) lol. Easy install, well engineered and even the packaging is ridiculously awesome. Comes with a nice harness that with basic understanding of the Upfitter switches was easy to adapt and install. Highly recommend.

Looks fantastic! I'm definitely going to be doing something similar with my WT between the pre-runner bar and the larger lights up front. Still on the fence about the bumper lights though. VA has some weird rules about covers on accessory lighting. Need to get read up on that before I make any major calls.

 

[Tork]

One thing I did to the back seats of my two door, was add two rope clevises, so when I lay the seats forward I can reach the ropes to pull the seats back to the normal position. I made the rope clevises.

 

[Tor148]

Installed our Gobi racks.

Doesn't that limit opening the swing gate?
I mounted mine in the other side to get freedom of movement

 

[NM_21Bronco]

After going back and forth on a couple options, I decided on an Array of Morimoto 4-Bangers for my "fogs". Splurged a little, but well worth it, completes my front end I believe (until somebody comes out with cool sheeetttt) lol. Easy install, well engineered and even the packaging is ridiculously awesome. Comes with a nice harness that with basic understanding of the Upfitter switches was easy to adapt and install. Highly recommend.

I was gonna stick with Rigid as they told me they were coming out with a fog kit in "30-60 days" but I love the look of those fogs....

 

[EMBronco]

Installed all new 4" Polk marine speakers front and rear along with the 6.5s in the kick panels, er, wait, scratch that. Replace with, noticed that I am an idiot and bought six of the pass through wiring harness for the 6.5s and then ordered the proper Metra harnesses for the 4"s.

Just to note.

6.5 pass through harnesses - Metra 72-5602
4" dash and roll bar speaker pods - Metra 72-5600
EDIT: 5600's still not exactly right, got them to work, but takes some McGyvering.
EDIT: Metra 72-7902 look like they are it for the dash and rear speakers.


If I was still in my 20's I would have just used a crimp and solder connector and rocked out. But I'm not with that ennymoore.

Any one need a pass-though connector? Drop a fiver in a envelope with a SASE and you can have one of two on the shelf.

EDIT: Got the front Polks in and oh my! Almost don't need to do the rears and kick panel speakers. They totally rock!

Can you confirm the 72-7902 adaptors worked for your front and roll bar speakers?

 

[Beach_Bum]

I had originally ordered the rokblokz but cancelled before they could ship. I could write up a how to if there’s interest. In all it cost me about $50 These won’t work if the rear crash bars are removed.

Just finished through to the end and didn't see anyone else reply with a follow up. I'm sure I'm not the only one that would appreciate a separate post detailing a material list and write up on assembly and install. You came up with a simple, effective and cost-efficient solution. Nice job.

 

[Elonmsk]

Doesn't that limit opening the swing gate?
I mounted mine in the other side to get freedom of movement

Are you referring to the recovery boards? If so, I have a quick release that allows them to slide up. No issue with obstruction.

 

[Jmor]

Zion National Park

Sponsored