Whats on your MOLLE swing gate?

[DDGator]

I used my FordPass Points for the Ford swing gate MOLLE system. It's not perfect, but it works fine.

I'm trying to decide what I want on the MOLLE grid. For me, one concern is that I have a soft top, have the top down often, and don't have the locking cargo cover (at least yet), so I don't want to carry a bunch of expensive items. So far I have a first aid kit, a trauma kit (for severe bleeding/GSW, etc.), a flashlight, multitool, utility shears, and (you can't see it) a rescue hammer with glass break and seatbelt cutter. Considering adding some road flares. But -- this still a work in progress.

Apologies for the cheap flashlight -- I've got good ones, but this one is actually not bad for what it is. The multi-tool was a freebie, but also not a piece of junk.

What's on your swing gate?

Sponsored

 

[dgorsett]

I mounted a saw, tow strap, entrenching shovel and added a small pouch with shackles etc since the first photo to my sorta Molle tailgate table.

 

[cardad]

I mounted a saw, tow strap, entrenching shovel and added a small pouch with shackles etc since the first photo to my sorta Molle tailgate table.

Is that the Ford table? I installed that and one of the bolts pushed into the exterior panel causing some paint and body damage. Did you run into any installation issues?

I’d imagine all that weight on the table just causes it to rattle even more. I wrapped the metal rod hinge thing with some electrical tape and that worked for the main rattle but after one long bumpy trail the tape fell off.

 

[dgorsett]

Is that the Ford table? I installed that and one of the bolts pushed into the exterior panel causing some paint and body damage. Did you run into any installation issues?

I’d imagine all that weight on the table just causes it to rattle even more. I wrapped the metal rod hinge thing with some electrical tape and that worked for the main rattle but after one long bumpy trail the tape fell off.

Ford table. No installation issues. The table came with a 7/16" bit and depth gauge. I took it very slow and easy drilling, setting nutserts and securing table to avoid over depth drilling or stripping serts.

Surprisingly , no rattles even with all the hardware strapped on. I do have that intermittent top popping and some kind of dash rattle that may make me crazy though.

 

[Macjr]

 

[BroncoKong Jr.]

I used my FordPass Points for the Ford swing gate MOLLE system. It's not perfect, but it works fine.

I'm trying to decide what I want on the MOLLE grid. For me, one concern is that I have a soft top, have the top down often, and don't have the locking cargo cover (at least yet), so I don't want to carry a bunch of expensive items. So far I have a first aid kit, a trauma kit (for severe bleeding/GSW, etc.), a flashlight, multitool, utility shears, and (you can't see it) a rescue hammer with glass break and seatbelt cutter. Considering adding some road flares. But -- this still a work in progress.

Apologies for the cheap flashlight -- I've got good ones, but this one is actually not bad for what it is. The multi-tool was a freebie, but also not a piece of junk.

What's on your swing gate?

Looks great but I'd put the rescue hammer near the driver

 

[BoMiltenberger]

TFO for the win!

 

[VelocityBronco]

Here is mine as of now, still playing around with the layout and have a fire extinguisher coming that I might add if it makes sense.
This is the @JcrOffroad tailgate table.

 

[RescueCheckPT2]

I used my FordPass Points for the Ford swing gate MOLLE system. It's not perfect, but it works fine.

I'm trying to decide what I want on the MOLLE grid. For me, one concern is that I have a soft top, have the top down often, and don't have the locking cargo cover (at least yet), so I don't want to carry a bunch of expensive items. So far I have a first aid kit, a trauma kit (for severe bleeding/GSW, etc.), a flashlight, multitool, utility shears, and (you can't see it) a rescue hammer with glass break and seatbelt cutter. Considering adding some road flares. But -- this still a work in progress.

Apologies for the cheap flashlight -- I've got good ones, but this one is actually not bad for what it is. The multi-tool was a freebie, but also not a piece of junk.

What's on your swing gate?

You know you’re a gear guy when you preemptively apologize for a photo with a cheap flashlight haha.

Looks like a decent set up, man. Watching this thread.

 

[TheShark]

 

[DDGator]

Looks great but I'd put the rescue hammer near the driver

I have one up front too!

 

[DDGator]

You know you’re a gear guy when you preemptively apologize for a photo with a cheap flashlight haha.

I know, right? LOL. That is actually a decent but cheap LED with multiple functions, but I've got some nice lights too.

 

[BCA]

Here is mine as of now, still playing around with the layout and have a fire extinguisher coming that I might add if it makes sense.
This is the @JcrOffroad tailgate table.

How do you like the JCR table? Any rattle issues, I am leaning towards getting this one.

 

[VelocityBronco]

How do you like the JCR table? Any rattle issues, I am leaning towards getting this one.

It's great! No rattles, easy to assemble and no drilling to install!
I like that it has a flat table surface when folded down, and also the MOLLE for storage.
100% would recommend. Bonus that it's made in Michigan. Supporting local business!

 

[hkbooner]

It's great! No rattles, easy to assemble and no drilling to install!
I like that it has a flat table surface when folded down, and also the MOLLE for storage.
100% would recommend. Bonus that it's made in Michigan. Supporting local business!

And they are military/vet friendly offering a 10% discount with code.

Sponsored