Is it possible to weld them to the frame?All three of our sliders (Armor Lite, Destroyer and Signature) will use the same mounting. We do recommend drilling if you plan to use them for anything more than a step. They are bolt on with several bolt locations and will work fine as bolt on only for a step. However the front mounting area on the frame lacks sufficient bolt locations for use as a slider, so we recommend drilling those at least.
We have not encountered any wiring inside the frame rails, but there are wire harness and brake lines on the outside of the frame. These will not be a problem during installation. We had no issues drilling our frame, just need a drill and a few good drill bits, easy.
Sponsored