Fog lights for Base Model

[Bbaliatico]

I just got a base 4 door and have been looking for fog lights. I’m going a little old school look, eg, keeping steelies but with 285’s.
See picts as fillows
- fog light oem part with no lens/bulb that has no bulb or lens and is $184
- $33 pair from Amazon with yellow lens and no bulb
- $17.99 light with clear lens and H11 bulb included from amazon
- up close pictures of the $17.99 In hand

is it me or is the same part?!

View attachment 280489

View attachment 280491

View attachment 280492

View attachment 280493

View attachment 280494

View attachment 280495

Sponsored

 

[4x4TruckLEDs.com]

The attachments you linked don't work.

If you want some replacement fogs check out our site: https://www.4x4truckleds.com/vehicle-specific/ford-bronco/2021-bronco/

You can't just replace the bulbs on your fogs, they are already LED from the factory. But you can swap out the entire housing with a new one from Baja Designs or Diode Dynamics

 

[Bbaliatico]

I have a base, no fogs at all. The links were pictures of entire fog lights that look identical to the Ford part

 

[Meals20]

I just got a base 4 door and have been looking for fog lights. I’m going a little old school look, eg, keeping steelies but with 285’s.
See picts as fillows
- fog light oem part with no lens/bulb that has no bulb or lens and is $184
- $33 pair from Amazon with yellow lens and no bulb
- $17.99 light with clear lens and H11 bulb included from amazon
- up close pictures of the $17.99 In hand

is it me or is the same part?!

View attachment 280489

View attachment 280491

View attachment 280492

View attachment 280493

View attachment 280494

View attachment 280495

Nobody is going to be able to answer your question because your picture links are bunk.
I am going to run with these on my base bumper no factory fogs. I have the lights but no Bronco. https://www.4x4truckleds.com/diode-dynamics-stage-series-3-sport-yellow-sae-fog-flush-pair/

 

[Bbaliatico]

sorry for the mixup on images, not sure why that happened.

 

[Meals20]

sorry for the mixup on images, not sure why that happened.

Will you be buying the factory plastic housings on the bumper to accommodate these cans or cutting the ones that come on it?

 

[Bbaliatico]

I would prefer to buy the housing but I could not find the part. Still looking. Otherwise, hole saw.

 

[Meals20]

I would prefer to buy the housing but I could not find the part. Still looking. Otherwise, hole saw.

The Amazon housing might fit and might not? It might share the same bolt up pattern but housing dimensions are off. The Ford p# listed there doesn't cross reference to the Ford p# listed for the Bronco. The Bronco housing p# is the same for 19'/20' Ranger. Imho the aftermarket options are the way to go. You can get kits with lighting and harness ready to go from Forum sponsor @4x4TruckLEDs.com

 

[Bbaliatico]

They fit. Anyone know the part # for the bumper cover with the fog opening?

 

[Tarheel_Wes]

They fit. Anyone know the part # for the bumper cover with the fog opening?

which bumper do you have? Is this the modular bumper or the plastic base ?

 

[Bbaliatico]

Yes, the base plastic bumper. You can see the bumper cover is removed on the left. There is a standard replacement that fits exactly, but has a hole for the light. One right, one left.

M2DZ17E811DA
M2DZ17E810DA

 

[Meals20]

They fit. Anyone know the part # for the bumper cover with the fog opening?

Sweet! Were you able to order the covers?

 

[Bbaliatico]

Yes. One is on backorder. Found an online dealer selling for $54 vs $80 list too.

 

[Bbaliatico]

So, the factory fog light bumper panels are on back order. I test fit the $17 Amazon fog and it fits the mount perfectly. I found the center of that part of the panel and used a 3-1/2” hole saw to make the cutout. I’ll still put in the factory panels, but if anyone wants a factory like fog setup, $34 and a hole saw (less the wiring).

 

[2ata]

What are you doing for the bulb plug and wiring?

Sponsored