GO RHINO DOMINATOR DSS SLIDERS installed

[Inspector_Nipples]

Cheapest step+slider I've found. They run about $500 and are pretty easy to install, definitely have a buddy and watch the youtube video on how to install since the instructions included are pretty bad. Here's the link, best of luck to anyone who wants these! https://www.pandamotorworks.com/col...me-dss-sidesteps-complete-kit-w-sidestep-brkt

Sponsored

 

[BroncoAdventures]

Cheapest step+slider I've found. They run about $500 and are pretty easy to install, definitely have a buddy and watch the youtube video on how to install since the instructions included are pretty bad. Here's the link, best of luck to anyone who wants these! https://www.pandamotorworks.com/col...me-dss-sidesteps-complete-kit-w-sidestep-brkt

These sliders have already saved me .

 

[Lexo52]

Thinking on buying these, they protect the bottom rocker panel well? Don't think I'll ever be doing g hard wheeling but do want them to be able to protect

 

[Inspector_Nipples]

Thinking on buying these, they protect the bottom rocker panel well? Don't think I'll ever be doing g hard wheeling but do want them to be able to protect

I would say, they mount to both the pinch weld and to the body. If you watch the video you will see how sturdy it looks especially with the bracket they include.

 

[RainbowStix]

These sliders have already saved me .

Did you put some kind of covering over the tubes? And is that the DS or DSS?

 

[Tarheel_Wes]

Did you put some kind of covering over the tubes? And is that the DS or DSS?

Those look like DS

I just got my DSS the other day

This is DSS:

And this is DS

 

[RainbowStix]

Those look like DS

I just got my DSS the other day

This is DSS:

And this is DS

Thank you! Would you be able to take a picture of them from the side? I run 37s and just want to see how close they are to the tire (current setup without ucas for caster rub the stock rail). Also, does your steps get in the way of you getting in/out?
I was also trying to figure out how far out from the body these stick..

 

[Tarheel_Wes]

Thank you! Would you be able to take a picture of them from the side? I run 37s and just want to see how close they are to the tire (current setup without ucas for caster rub the stock rail). Also, does your steps get in the way of you getting in/out?
I was also trying to figure out how far out from the body these stick..

So this isn’t my photo

I’m gonna try to get mine installed today if possible

Whenever I do I’ll take some photos for you

 

[Tarheel_Wes]

Thank you! Would you be able to take a picture of them from the side? I run 37s and just want to see how close they are to the tire (current setup without ucas for caster rub the stock rail). Also, does your steps get in the way of you getting in/out?
I was also trying to figure out how far out from the body these stick..

Got mine on today. Here’s some photos:

 

[RainbowStix]

Got mine on today. Here’s some photos:

Man these look good! Low key making me regret ordering some bodyguard sliders but we’ll see what they look like installed. do you know how far out these stick out from the door? Doesn’t look like too much or too little

 

[Tarheel_Wes]

Man these look good! Low key making me regret ordering some bodyguard sliders but we’ll see what they look like installed. do you know how far out these stick out from the door? Doesn’t look like too much or too little

I’ll take an actual measurement but the DSS is supposed to be a 3.5” stepping surface. (The DS model is 2.5”)

 

[108StitchBronco]

Got mine on today. Here’s some photos:

Pretty sure I know the answer, but yours is a non SAS correct? I have a non-SAS OBX and want something that will stick out right about at the fenders and this looks perfect! I love the eruption green how you have it set up, very nice!

 

[67BroncoG1]

I need these in a 2 door version.

 

[Tarheel_Wes]

Pretty sure I know the answer, but yours is a non SAS correct? I have a non-SAS OBX and want something that will stick out right about at the fenders and this looks perfect! I love the eruption green how you have it set up, very nice!

yep

Non-SAS Black Diamond

 

[Bucker]

Here's mine.

Sponsored