do you have a photo? Also, does it hook up straight to the battery or a fuse? Where do the future lights wire into?
I'll snap some pics in the morning. You have to hookup the main power to the battery and the relay to a switchable fuse. The fuse jumper that comes with the kit does not fit the bronco, you will have to go pickup a micro add a fuse kit. The 3rd wire gets grounded.
oh wow! Very nice. I’m assuming the bracket and all the mounting hardware comes with it in the box?Not the best pic because it was still a little dark out, here is where I put the mount. The factory bracket needed just very minor modification. I also put a thin washer under the bracket at the bolt holes to spackle it off the plastic slightly. This way I can go back to stock and out the Ford badge back on with no issues.
Yes it does. The one thing you will need is a different add a fuse. The one that comes in the box is not the correct size for the bronco.
Any chance u have a link for that add a fuse? Also did u use interior or outside fuse box?
Really like where you placed it. Just received my switches and plan to install soon never done anything like it before! So kinda nervous lolHere are some pictures of the install I did last weekend on mine. On the bracket that holds the electronics box I needed to cut off the tabs I marked in one of the photos and drill a hole a little closer to the bracket to attach it to the battery hold down bolt. The circuit breaker is bolted to the battery tray below the Electrical box bracket on one of the square holes. The wiring was ran into the cabin through where the clutch would pass through the firewall and ran the cable up through the A pillar. The switch panel was held in place with 3m tape so no holes had to be drilled. The fuse tap provided is the wrong size so just go to auto zone and pick up the correct one.
