Show us your installed wheel / tire upgrades here! (Pics)

[71to21-2DR]

Badlands Sasquatch with 325/65/18 Nitto Ridge Grabbers -- Thought I'd share what a stock Sasquatch looks like replacing the +33mm offset factory 17" wheels and moving to +10mm offset 18" Enkie Matrix wheel.

Almost the exact same rolling diameter with just .02" taller than stock Sasquatch with the Goodyear 315/70/17 tires now with roughly 3/4" more tire width w/o rubbing .

The actual treads that touch the ground just fit inside of fender where the bulge of the rest of the tire pokes slightly.

Wow that whole combination of silver gray and black looks excellent!
The wheel size and poke is perfect!
There’s just enough lip on the wheel so it’s not flat like most positive Offsets!
Very nice!

Sponsored

 

[CoastalCreature]

20” Fuel with BF’s

Tire and wheel specs with offset? It looks really about perfect to me.

 

[chtucker]

Got crucified on the B6X Facebook feed- TR Beadlocks- put them on the FE to see how the looked, have a race red as well if I don't want to keep them on the Lightning blue

 

[Mjolnir21]

285/70/17 Thunderer Mud tires on XD139 portal 17x8.5 wheels. No lift

 

[NurseDan]

Got crucified on the B6X Facebook feed- TR Beadlocks- put them on the FE to see how the looked, have a race red as well if I don't want to keep them on the Lightning blue

Ya know what? I think that’s pretty unique and interesting!

 

[Gtrekker]

Woooaaah!!!! Where are the 37" KO2s?

Wait, here's one!!! Lol.....
Installing rock lights (beer brake), just pretty parts. Waiting on exhaust, and motor upgrades.

 

[flip]

2D, MT, Base, 2.3
Method 705 Titanium +35
Mickey LT315/70R17 Baja Boss
2" Zone Lift

 

[buzpro]

2D, MT, Base, 2.3
Method 705 Titanium +35
Mickey LT315/70R17 Baja Boss
2" Zone Lift

LOVE it ..... The only thing you need to do is to take that dealer sticker off the back

 

[flip]

LOEV it ..... The only thing you need to do is to take that dealer sticker off the back

Why they put white on instead of grey is beyond me.

 

[rguest3]

flip - Your Bronco looks great! Love the MR705 wheels! Is there any rubbing or issues with that +35 Offset? Any mods needed? How much clearance between the Upper Control Arm and the inside of the 315/70/17 tire?

Gtrekker - Same question. Is there any rubbing or issues with the 37s and Sasquatch +30 wheels? Any mods needed?

 

[MNalls]

Being transparent here:
After 3K miles on Tina (Oxford White Big Bend Non Squatch 2.7), we finally threw on her some new shoes with heels!

-Zone Offroad 2 inch Leveling (on the fence of waiting for more lift kit options to come to market, or just stick with these and possibly throw on some bilsteins)
-35/12.50/17 BFG KO2 RWL (this gives me the option to throw some old school white lettering for a bit or switch back to normal black sidewalls if needed)
-17x8.5 Fifteen52 Traverse wheels 0 offset (on the fence for all black wheel.. might change it up a bit with some added color to interior of wheel somehow down the road)

Next:
Side step /rock slider
Large Round Lights upfront
Extended Rear spare tire lower rubber support mounts (if anyone knows where I can find these, please share)

Love the wheels, I have the same ones on order for my BadSas. Yours looks great, your post said non-sas, but your flares look wider like the sas ones. Is that just the angle? I'm trying to gauge my poke.

 

[Broncola]

Finally posting my own Bronco on this thread. 285/75r16 BFG KO2s on stock steelies, stock base suspension. Balloon of tire is pretty much exactly even with standard flares.

 

[mcdoogs]

Does anyone regret going up to E load tires? I’m trying to decide between a few sizes, and wondering how much of a factor i should consider load rating. Do E’s harsh the Bronco’s ride since they are way overkill on the road? Is it like driving an empty f150 lol?

 

[cxcrum]

Love the wheels, I have the same ones on order for my BadSas. Yours looks great, your post said non-sas, but your flares look wider like the sas ones. Is that just the angle? I'm trying to gauge my poke.

Good question.
Yes, those are sasquatch fenders.
The original fenders just didn't cover enough of the poke.
I hope these additional images with sas fenders help.

 

[MNalls]

Good question.
Yes, those are sasquatch fenders.
The original fenders just didn't cover enough of the poke.
I hope these additional images with sas fenders help.

perfect, thanks
I have a 1/31 build date, so fingers crossed

Sponsored