Open-Source: Trunk Storage System (Open TSS)

[HammerNQuill]

I had an itch to work on designing something a little more versatile... I present the Modular Cargo Platform (MCP)

Using 10 series extrusion as a frame, this will increase rigidity and platform security. Additionally, horizontal T-slot tracks run the width of the cargo area to provide flexible mounting points for tie down anchors, fridge slides, leveling platform, or whatever you can imagine. Large panel access to the cargo storage areas is maintained, with split access for the larger one (in case something is mounted on one side or the other).

This is still just a concept. I've got other priorities at the moment, but hoping to build something like this soon.

Nicely done! I like the t-track for keeping things from sliding back and forth; lateral movement can be limited more easily. Just include relief openings for sliding in T-bolts and this is a great start.

Sponsored

 

[Russ.Cere]

Made a few brackets for the trunk. These should arrive late this week for proofing.

Edit* These will be added to the DIY Section of Modcrate

 

[Russ.Cere]

Working on a base update. I hope to have to new base files uploaded and available by COB Friday.
As pictured will require use of a manual or CNC router.
Center removable panel drawn with 1/8 saw kerf

.

 

[Russ.Cere]

Apologies to anyone watching this thread. I received my military orders and am planning a cross country move. Update attached.

Consider checking out Bronco Mods – ModCrate purchases support my DIY projects.

If you have your own cnc router and need 3d files message me and ill sort you out.

*EDIT: Pocket detail dimensions to come later today.

 

[Shawn_1121]

does anyone have the dimensions/measurements to where the bolts would go in the corners to tie the platform down?

 

[Russ.Cere]

does anyone have the dimensions/measurements to where the bolts would go in the corners to tie the platform down?

I'll add that later today, see edit on previous post.

 

[Russ.Cere]

Mounting Detail Update

 

[Shawn_1121]

I have an approximate model based on the 4 door's cargo area dimensions and applying the measurements found here.

do you have the measurements for this design? 4dr

 

[Darcyjs14]

Hey @Russ.Cere, n00b question here. Could I send this out to Send/Cut/Send for fabrication? I have a fabricator that I work with too. He’s got a waterjet, so that might be an option for me too.

 

[Russ.Cere]

Hey @Russ.Cere, n00b question here. Could I send this out to Send/Cut/Send for fabrication? I have a fabricator that I work with too. He’s got a waterjet, so that might be an option for me too.

You can. They only offer ~.5" thickness for routing, I think that's a bit thin. I also think their pricing for large items like this is a bit on the expensive side. What I did was search Facebook market for someone offering CNC routing services cost me about $90. You're in Seattle? Sunday I can dig through my Facebook messages and put you in touch with the person I used.

Could hand route as well. .

 

[Darcyjs14]

Lakewood, by JBLM. My kids live on Mercer Island, so I’m up in Seattle all the time. It would great if you’re will to share your fabricator.

 

[Russ.Cere]

Lakewood, by JBLM. My kids live on Mercer Island, so I’m up in Seattle all the time. It would great if you’re will to share your fabricator.

Found it in my marketplace history. This is the person and associated listing I used.

https://www.facebook.com/marketplace/item/653674786319359/

 

[mpeugeot]

Awesome stuff, bookmarking it for future use.

 

[Russ.Cere]

Awesome stuff, bookmarking it for future use.

I still recommend shopping around I find a good number of freelancers that do great work.

 

[mpeugeot]

I still recommend shopping around I find a good number of freelancers that do great work.

I am stealing ideas, not looking for a contractor.

Sponsored