What's in the Bronco tool kit?

[CyberOrangeBadlands]

Its the roof rack driver.

Have only had my Bronco for less than 2 months and it came with a roof rack.

My tool kit did not come with this roof rack driver. Did you purchase this separately or did your tool kit come with this?

Haven‘t attempted to take roof rack off yet - do you need this to do so?

Sponsored

 

[Deleted User 5719102]

Have only had my Bronco for less than 2 months and it came with a roof rack.

My tool kit did not come with this roof rack driver. Did you purchase this separately or did your tool kit come with this?

Haven‘t attempted to take roof rack off yet - do you need this to do so?

If you ordered and received the Ford roof rack, you should of received a plastic clear zip bag, with in it would be 2 additional plastic clear zip bags with your color matched roof delete covers with wrench and nuts. These roof delete covers go above your windshield where the roof rack mounts.

 

[Scott R Nelson]

What’s the large thing at the top?

There's a close-up of it about two posts above that one, in the photo that I posted.

 

[cyberfalco]

If you did not get the roof rack tool, a 7mm, 6 point, socket on a 2Nm driver works.

 

[Save The Manuals]

If you ordered and received the Ford roof rack, you should of received a plastic clear zip bag, with in it would be 2 additional plastic clear zip bags with your color matched roof delete covers with wrench and nuts. These roof delete covers go above your windshield where the roof rack mounts.

I need to find these or get in touch with the dealer it seems

 

[Deleted User 5719102]

I need to find these or get in touch with the dealer it seems

Mine were in the glove box in the clear zip lock bags as mentioned before. My buddy had his in the glove box also.

 

[Save The Manuals]

Mine were in the glove box in the clear zip lock bags as mentioned before. My buddy had his in the glove box also.

+1 for the glove box, thank you

 

[EddieA]

I was wondering that too but are the empty loops for the door bolts when you remove them? Everyone have empty spots in the tool kit?

Yes, I do.

 

[The Green Flash]

Good luck finding the roof rack removal tool.

6.5mm socket fits the triangulat screw heads perfectly...

 

[Scott R Nelson]

6.5mm socket fits the triangulat screw heads perfectly...

Where in the world does one acquire a 6.5mm socket? I've never seen one. I don't think I've ever seen a socket that wasn't an even number of mm.

In any case, that triangular tool is no longer in my Bronco tool kit. My son bought a 2-door Sasquatch very similar to mine except with a manual transmission and talked me into "loaning" him the roof rack. I'll probably never see it again, and I'm okay with that, as long as it gets used, which it will.

 

[The Green Flash]

Where in the world does one acquire a 6.5mm socket? I've never seen one. I don't think I've ever seen a socket that wasn't an even number of mm.

In any case, that triangular tool is no longer in my Bronco tool kit. My son bought a 2-door Sasquatch very similar to mine except with a manual transmission and talked me into "loaning" him the roof rack. I'll probably never see it again, and I'm okay with that, as long as it gets used, which it will.

Found it in my huge drawer of misc. metric sockets while trying to remove the roof rack. Probably inherited from my dad (or maybe my father in laws)collection when they passed. Says 6.5mm on the side, I just assumed that was a normal metric socket. Fits the triangle head perfectly.

Sponsored