This was the day I got it - with 33" LT255/80R17 pizza cutters and no lift. Second picture is after a 1" level on the front and the fender flare deleteAnyone with steelies, non-lifted, and a fender flare delete? Extra points for cactus gray
Basically this with no lift and stock tires:
There were no rubbing or clearance issues before the leveling kit. No need to remove the crash bars, and plenty of clearance above. I actually picked it up on Christmas Eve and they didn't have time to do the lift until a couple of weeks later. Here's a picture of it before the lift. these tires are 1/2 inch narrower and 1.5 inches taller than the stock BD tires.
Looks great. Likely the way I will go once the stock tires have worn out. Hopefully a few more tires in that size by thenThere were no rubbing or clearance issues before the leveling kit. No need to remove the crash bars, and plenty of clearance above. I actually picked it up on Christmas Eve and they didn't have time to do the lift until a couple of weeks later. Here's a picture of it before the lift. these tires are 1/2 inch narrower and 1.5 inches taller than the stock BD tires.
Had to bend slightly
Is that where the dealer put your plate or did you move it there? I'm in MA too but I got the capable bumper, didn't know if they've found a better spot.
I asked the dealer not to drill the front, so they just zip tied it above the bumper. I moved it to the alternate location with a KR Offroad bracket from 4x4truckLEDs.com
I think it's a rendering? A manual wouldn't habe trail turn assist. I realise its an auto but if it's from their build and price it's probably all spliced togetherAnyone who has received a 2022.
Can you confirm the buttons you have? I think it should be as follows but the image online only shows 3 buttons. Not sure what is missing.
-Hazards
-Traction Control
-Trail Turn Assist
-Rear Locker
