OP
OP
- First Name
- Bradley
- Joined
- Nov 3, 2023
- Threads
- 4
- Messages
- 19
- Reaction score
- 8
- Location
- Orefield, PA
- Vehicle(s)
- Ford Bronco
- Your Bronco Model
- Badlands
- Thread starter
- #16
Hey everyone!
The qty 4 parking sensors I ordered arrived (NU5Z-15K859-DG
(Bronco build date 07/10/2023-Present)
https://www.tascaparts.com/oem-parts/ford-sensor-parking-aid-system-nu5z15k859dg) and I was able to test. Here are my findings:
These parking sensors worked! I was lucky my build date was post 7/10/2023 (thanks to @flip for the info!)
One thing to note: when testing the functionality of the parking sensors, it is not enough to have the vehicle in Drive and have an object near the sensor. The vehicle actually has to BE IN MOTION to test the functionality. It is highly recommended when making the bumper swap you have at least two people handy to help hold up your newly wired harness and place a hand/object in front of the sensor while you slowly creep forward.
Also, attached are some photos of me rerouting the Capable Bumper Wiring Harness on the back of the Modular Bumper. Again, you will need to remove one of the plastic cable raceways in order to bend this harness behind the modular bumper plate.
The qty 4 parking sensors I ordered arrived (NU5Z-15K859-DG
(Bronco build date 07/10/2023-Present)
https://www.tascaparts.com/oem-parts/ford-sensor-parking-aid-system-nu5z15k859dg) and I was able to test. Here are my findings:
These parking sensors worked! I was lucky my build date was post 7/10/2023 (thanks to @flip for the info!)
One thing to note: when testing the functionality of the parking sensors, it is not enough to have the vehicle in Drive and have an object near the sensor. The vehicle actually has to BE IN MOTION to test the functionality. It is highly recommended when making the bumper swap you have at least two people handy to help hold up your newly wired harness and place a hand/object in front of the sensor while you slowly creep forward.
Also, attached are some photos of me rerouting the Capable Bumper Wiring Harness on the back of the Modular Bumper. Again, you will need to remove one of the plastic cable raceways in order to bend this harness behind the modular bumper plate.
Sponsored
Last edited:
