Old school wheels options

[Sparkherd]

I will be looking for something like the western turbine wheels when the time comes.

Been there, did dat!
I want SLOT MAGS Baybee!!!

Sponsored

 

[Sparkherd]

When I upgrade, it will be mag slots or turbines, or white steel.

I L-U-V me some slot mags!!!

 

[Sparkherd]

These wheels are avail for the early Bronco. Sure hope they offer them for the new models:
http://us-mags.com/indy-u101-truck-w-5493.htm

SLot Mags Baybee!!!

 

[peterh]

those who want slot mags need to email US Wheels customer service - they have no plans to make them in any configuration right now that would prevent massive poke. perhaps if enough people asked, their R and D people might get the green light to design some that minimize poke. Right now, they have advised that the wheel as designed cannot be produced in the plus 30 adn 55 offsets
make your voices heard, slot mag fans

 

[71to21-2DR]

those who want slot mags need to email US Wheels customer service - they have no plans to make them in any configuration right now that would prevent massive poke. perhaps if enough people asked, their R and D people might get the green light to design some that minimize poke. Right now, they have advised that the wheel as designed cannot be produced in the plus 30 adn 55 offsets
make your voices heard, slot mag fans

They can make zero offset with that pattern

 

[71to21-2DR]

Same here, it's my favorite so far. We need details!

Well that looks a lot better than I imagined

 

[Silver-Bolt]

If they make a "slot mag" in a Bronco appropriate offset, that would be my first choice. Until then my requirements are light weight, easy to clean, and strong. So far these Motegi's are leading the pack. I will likely have them powdercoated silver.

 

[peterh]

what are the specs on those!? will look good powder coated silver for sure.

 

[peterh]

They can make zero offset with that pattern

thanks for that info - do they already make them that way or do they need to be custom ordered?
how much poke would that leave with the Badlands trim - 2 1/4 inches?
I am thinking of getting the ADV fenders and wonder if they could cover some more of that poke over stock quarter panels/flares
not sure if this factors into poke but was going to go with 275/75/17s which i think may be thinner than the stock 33 on the badlands

 

[71to21-2DR]

thanks for that info - do they already make them that way or do they need to be custom ordered?
how much poke would that leave with the Badlands trim - 2 1/4 inches?
I am thinking of getting the ADV fenders and wonder if they could cover some more of that poke over stock quarter panels/flares
not sure if this factors into poke but was going to go with 275/75/17s which i think may be thinner than the stock 33 on the badlands

I don’t know just that they could if they wanted. I think some of their car mags are in more positive offsets, but not like modern cars,
They have them sll day in 15”
They could easily make them in 17”
With 0 on 8”-9”
They just don’t want to!
They have to be 20+ -44
or all black!
So sick of that look

 

[peterh]

well as one of the guys who pushed real hard for a green, to the point of bringing mallard samples to two dealer showings, all i can say is make your collective voices heard to US mags - make them want to make them!

 

[peterh]

looks like a dealer put some MT old school wheels on - or at least MT lookalikes - hard to guage how much poke there is which could be a deal breaker for me, but man I think it looks great

 

[AARDVARK122]

Ok my wheels are all done for my rig. Now all that needs to happen is be delivered. Had a 11/3 build date. And sill no sign of it. Getting frustrated for sure.

 

[holo37]

Ok my wheels are all done for my rig. Now all that needs to happen is be delivered. Had a 11/3 build date. And sill no sign of it. Getting frustrated for sure.

Those are amazing. What are they? What size? How much? I want them for my 2dr EB

 

[AARDVARK122]

Those are amazing. What are they? What size? How much? I want them for my 2dr EB

The are custom built wheel smith wheels. 17x8 smoothie. With a +30mm offset. With police interceptor caps with custom graphics designed by me. The wheels are 280 a wheel. Plus 50 each for powder coating. And 40 each for the center cap. They are a little more expensive then and alloy wheel. But are exactly what I was wanting for my 2 door bronco. Now it is just a waiting game.

Sponsored