Lighting and equipment

[WildtrakBroncoBuyer]

For those interested in fords after market lighting, used rigid lighting for my set up. Both the 40inch roof mounted light bar and rigid 360 degree pod lights aren’t crazy complicated to install. Saving my bronco riders money by avoiding the dealer mark up install . Most places charge upwards of 450& -675$ for labor after putting down the 350$ for the lighting. I’m not an electrician but definitely wasn’t rocket science to put it all together. Hope this helps!

Sponsored

 

[Bronc-Itus]

Pics or it didn’t happen

 

[4x4TruckLEDs.com]

For those interested in fords after market lighting, used rigid lighting for my set up. Both the 40inch roof mounted light bar and rigid 360 degree pod lights aren’t crazy complicated to install. Saving my bronco riders money by avoiding the dealer mark up install . Most places charge upwards of 450& -675$ for labor after putting down the 350$ for the lighting. I’m not an electrician but definitely wasn’t rocket science to put it all together. Hope this helps!

Another money saver... don't buy the lights from Ford. There is nothing proprietary about it. Buy them from a vendor, such as ourselves.

The Rigid 360-Series lights Ford advertises for the pillars are here (4"): https://www.4x4truckleds.com/led-auxiliary-lights/rigid-industries/360-series/

We've also got lots of other bolt-on kits for the Bronco where you'll save $$ and get a killer setup

Sponsored