IAG mud flaps

[Bronco luv]

I have the new 2024 Everglades with the Sasquatch package and I’ve ordered the IAG mudflaps. They came with no instructions but I was wondering before I tried installing has anybody use these with the big tires? If so, was it a good fit, the company says it works with Sasquatch package I just want to make sure.!! thanks.

Sponsored

 

[Lowcountry Bronco]

I have the IAG flaps on my HE so yes, they fit. Try their video for install:



Someone should chime in to let you know about getting longer tabs but I used what came with it.

 

[Billy Baroo]

I installed them several weeks ago, super easy to install and they work great with the Sasquatch package along with the factory running boards.

 

[JL8jeff]

I put them on my base Sas and they fit fine with the hoop steps. When I added the Pro Comp wheels, they rubbed the flaps due to the -6 offset so I had to grind down some of the inside edge for clearance.

 

[JawnyBronco]

Here’s how good they look with the squared fenders…it is recommended to trim the fender by the mount hole or get longer clips at your hardware store to make threading the bolts easier

 

[HolidayDog]

I put these on my Everglades and they fit fine. Watching a video for instructions was kind of annoying but the video was well made, clear and concise. No yabbering.

I had to file out one of the holes for the clips to fit. Used a chainsaw file. It took some monkeying to get the bolts and nuts to connect but even

I put some black plastic thread nipples on the rear fasteners facing the tires. They were about an 1” too long. The black cleans them up to make them look less shiny.

So far they work great. I also added the IAG ez full length running boards.

 

[CarbonSteel]

I bought the front and rear i-line set and they fit and work well.

If I had to complain about something, it would be the fasteners. The are about 1" too long and stick out far too much in the inner wheel wells. So much so, I was concerned they would stick into the tires if the axle articulated enough.

I bought new ones that stick out just enough to put a jam nut on them.

 

[Bronco luv]

I have the IAG flaps on my HE so yes, they fit. Try their video for install:



Someone should chime in to let you know about getting longer tabs but I used what came with it.

Great!!! Thank you so much!!

 

[Bill K]

I put these on my Everglades and they fit fine. Watching a video for instructions was kind of annoying but the video was well made, clear and concise. No yabbering.

I had to file out one of the holes for the clips to fit. Used a chainsaw file. It took some monkeying to get the bolts and nuts to connect but even

I put some black plastic thread nipples on the rear fasteners facing the tires. They were about an 1” too long. The black cleans them up to make them look less shiny.

So far they work great. I also added the IAG ez full length running boards.

Had the same issue with filing one of the holes with mine as well... Overall like the flaps though.

 

[MattBrinks]

Anyone else having an issue with the flaps not quite sitting flush on the stock side step? The drivers side looked pretty good but the passenger side on mine is crooked.

 

[Mundergun]

I just put the I line ones up front and I’m running Goodyear Territory MT 315/70R17 on a 17x9 +1. They fit well and look decent. Don’t like mud flaps personally but I’m tired of all the rocks on my doors lol. On a full turn I get a slight rub on the drivers side only. I don’t get why it touches on only one side but I plan to dremel the inner lip it touches and that should fix it.

 

[AzGrayHeritage]

I just put the I line ones up front and I’m running Goodyear Territory MT 315/70R17 on a 17x9 +1. They fit well and look decent. Don’t like mud flaps personally but I’m tired of all the rocks on my doors lol. On a full turn I get a slight rub on the drivers side only. I don’t get why it touches on only one side but I plan to dremel the inner lip it touches and that should fix it.

Can you post pics?

 

[Mundergun]

sure here’s a picture from each side. On a full hard turn there was just a hair of rubbing on the inside so I took a dremel to the inner lips and it clears great now.

 

[AzGrayHeritage]

sure here’s a picture from each side. On a full hard turn there was just a hair of rubbing on the inside so I took a dremel to the inner lips and it clears great now.

Thank you. I wonder if these would work with Heritage Running boards?

 

[BigFootie]

Thank you. I wonder if these would work with Heritage Running boards?

Yes they will!

Sponsored