Texas Head Unit T-Harness Loopback for your 6G Bronco

[margareedaville]

Selling a new unused T-harness and loopback for your 6G Bronco. I bought two, and only needed one. Perfect if you want to add an amp for all four speakers and not splice/hunt/find a single wire. All it takes is unplug the factory harness from the radio, plug the T in, and then plug the loopback system in. Run the loopback wires to your amp, and you're done. Some YouTube videos out there of people doing it. Takes less than 30 minutes and you're up and running. All factory functions are unchanged.

Made for Ford vehicles 2018+
4 channels
12 volt accessory to signal on/off for amp

$250 + cost to ship

Sponsored

 

[margareedaville]

Any takers?

 

[thenewjs]

Link to youtube videos

 

[BroncoRush]

I know I'm missing something here. What's the difference between this harness and the PAC LPHFD31 LocPro Advanced T-Harness which available on Crutchfield for $60?

 

[white_dc]

I know I'm missing something here. What's the difference between this harness and the PAC LPHFD31 LocPro Advanced T-Harness which available on Crutchfield for $60?

you would still need the extension with is another $60. Plus his harness is already terminated and wrapped in techflex and tesa tape. It is pricey, but they are nicely made.

 

[margareedaville]

PAC LPHFD31 LocPro

This is eliminates fishing for wires and spicing, completely. You unplug the factory harness that has all the wires going to your speakers, then plug the "T" in line so that the sound goes out to your new amp, and then back to the speaker wire harness.

 

[The Compensator]

Did you use the other harness, did it work pretty well, do you have any pictures or a write-up of the install? Thanks

 

[margareedaville]

Did you use the other harness, did it work pretty well, do you have any pictures or a write-up of the install? Thanks

I bought two of these. This one shown was purchased in January, but it took them three months to make it. In the meantime I got impatient and had one made within a month. Literally two days after installing the second one, the first one finally came in. This one is from LLJ customs and is compatible with 2021 and up Fords. You can also buy the T-harnes for any other brand and keep the loop-back portion in place.

Here's the video of how it hooks up, and he has other videos about them too. I just happen to have one new and ready to ship out. I'll even ship for free if you want it. .

Sponsored