Fishing rod holders for inside the cab?

[glendola]

anyone come up with rod holders for inside the cab?

Sponsored

 

[RubiconSasquatch]

this is pertinent to my interests. I have been trying to come up with something since I have a soft top so no roof rack (until Gobi finally makes me one). Could do the typical PVC pipe job, maybe strapped to the roll bar? would probably work on a 4-door but might hinder ingress/egress. lots of bonked heads

 

[MrGreen55]

EIGHTLUG making one that goes on the outside https://www.bronco6g.com/forum/thre...rod-holder-name-might-change-who-knows.29787/

 

[RubiconSasquatch]

Could be cool, but I can’t seem to find any pics or drawings. I need to figure out a solution within the next couple of months, which probably won’t fit with commercial R&D timelines. Anyone have any thoughts?

 

[Dmorty217]

https://mountains2metal.com/product/fishing-rod-holder-for-m2m-accessory-bar-fits-2021-ford-bronco/

this is a option but you need the additional $279 mount to affix this to on the front. This is the only solution I have seen that has pictures and can actually be purchased today.

 

[BlueBronco]

Use these and hang from the rollbar and windshield frame? Might work if you only have a few and no 5th passenger.

Or buy a Bimini top and just lay them on top of that. Would probably require flipping the soft top open to get them in and out.

 

[RubiconSasquatch]

https://mountains2metal.com/product/fishing-rod-holder-for-m2m-accessory-bar-fits-2021-ford-bronco/

this is a option but you need the additional $279 mount to affix this to on the front. This is the only solution I have seen that has pictures and can actually be purchased today.

looks very interesting, great find! Sadly it’s mod bumper only. I have the “capable” bumper. Removed mod from my build when I realized it couldn’t handle a winch with ACC and a decent camera view. Since I knew I would be removing it eventually, decided to save the $600

Use these and hang from the rollbar and windshield frame? Might work if you only have a few and no 5th passenger.

Or buy a Bimini top and just lay them on top of that. Would probably require flipping the soft top open to get them in and out.

Another solid idea. I don’t know what OP’s use case is, but mine is for long trips. Like hundreds or even thousands of miles . Right now I’m planning a 6-week trip from DFW to Alaska and back. I’d like to fish along the way. Better than having to stop at so many grocery stores to replenish meat supplies

 

[Bemcnamara]

looks very interesting, great find! Sadly it’s mod bumper only. I have the “capable” bumper. Removed mod from my build when I realized it couldn’t handle a winch with ACC and a decent camera view. Since I knew I would be removing it eventually, decided to save the $600


Another solid idea. I don’t know what OP’s use case is, but mine is for long trips. Like hundreds or even thousands of miles . Right now I’m planning a 6-week trip from DFW to Alaska and back. I’d like to fish along the way. Better than having to stop at so many grocery stores to replenish meat supplies

I have used a variation of these over the years.
https://www.amazon.com/Tight-Line-Enterprises-Fishing-Vehicles/dp/B07CVNWYCL

 

[tourproto]

this is pertinent to my interests. I have been trying to come up with something since I have a soft top so no roof rack (until Gobi finally makes me one). Could do the typical PVC pipe job, maybe strapped to the roll bar? would probably work on a 4-door but might hinder ingress/egress. lots of bonked heads

So here is my solution. Not cheap

The roll bar wasn’t a good attachment point.

My solution required 2 purchases: The M2M flip down attic shelf and the DV8 overhead molle panel

the attic shelf provided a rear attachment point and the overhead molle panel includes a grab handle that provided the front attachment point.

Takes seconds to set up. Still have room for 4 passengers (could easily add 2 more rod holders side by side by side)

Sponsored