Attic tray prototype

[UtahBrandon]

I'm just too excited about it so I thought I'd share an updated shot of the attic tray that's getting cut and bent as a prototype. I reduced the height from the last prototype as it was just a bit too tall. This one is 2.5" tall (10.5" deep) and allows you to mount it to the top of the Traction Board Brackets to store your recover gear up and out of the way until you need it. With the MIC top in place, you have about 3.5" of clearance to shove your gear up there and lash it down. As this is a much larger piece than the traction board brackets, I do worry about the cost to produce, sell and ship, hoping that I can keep the pricing reasonable for all of us.

Let me know your thoughts on this project and if it's something you're interested in. A requirement is to have the Traction Board Brackets in place to mount this to the top of them.

Oh, and if you have the ARB Tred GT traction boards, they'll mount to the bottom of the attic tray and Traction Board Brackets.

Here's a link to the Traction Board Brackets in case you haven't seen them yet. Thanks to those of you that posted reviews on the site. Feels really good to design and create a product that provides value - https://puravidaoffroad.com/shop/ols/products/traction-board-mount

Sponsored

 

[SwampCactus]

Cool love to see some photos of it once you have it done and mounted. Can you get some with the top on, both loaded up with gear and slick?

 

[IDyeti]

Excellent design idea, love the idea of keeping these inside and not hanging off of something outside.

 

[22BlackDiamondGreen]

would love it if my soft top will still open

Sponsored