9/5/22 Build week group

[BroncoSkippy]

Yup, I live in a area with railcars and they a full.

So now I switch from worrying about Ford's (in)competance to the Government's in handling a potential rail strike. I need to accept that I may never get this thing...

Sponsored

 

[Skmac]

@Skmac im not trying to get anybodies hopes up, but I work next to highway 96 so I see a lot of the convoys drive by and I just saw a cyber orange MIC badlands go by on a truck. If yours shows up to your dealer today then I just saw yours go by.

I picked a bad two weeks to go on vacation.... out of the country. I guess im going to have to call my dealer

 

[M4Madness]

Heck, at least you guys are shipping. I'm a 9/8 blend that is stuck with an "in production" status. Lol! When it does ship, it'll be at my dealership the same day.

 

[D Rock]

what dealer did you go through? Mines going to Brighton Ford.

Bob Maxey Ford, just down Grand River a little ways from Brighton

 

[Skmac]

@Skmac im not trying to get anybodies hopes up, but I work next to highway 96 so I see a lot of the convoys drive by and I just saw a cyber orange MIC badlands go by on a truck. If yours shows up to your dealer today then I just saw yours go by.

Welp that was me, now i have to pick it up before I leave

 

[Afisher83]

Heck, at least you guys are shipping. I'm a 9/8 blend that is stuck with an "in production" status. Lol! When it does ship, it'll be at my dealership the same day.

I am 9/7 blend still marked as "In Production" and got annoyed with it. Chat yesterday offered no help. I reached out to my dealer today, and asked them to look into it. They said it is "produced" despite the "in production" status on the Pizza Tracker, and ETA to dealer is end of Sep. / Early Oct. (depending on the strike). So maybe its just a failed part of the Ford System where it didn't get scanned correctly as built. --- trying to stay optimistic.

 

[M4Madness]

I am 9/7 blend still marked as "In Production" and got annoyed with it. Chat yesterday offered no help. I reached out to my dealer today, and asked them to look into it. They said it is "produced" despite the "in production" status on the Pizza Tracker, and ETA to dealer is end of Sep. / Early Oct. (depending on the strike). So maybe its just a failed part of the Ford System where it didn't get scanned correctly as built. --- trying to stay optimistic.

On Monday, chat said "in production" with a delivery ETA of 9/22. I called last night instead of using chat, and got the same reply. I sent an email to the dealership's sales manager today (since my salesman never answers them), and have yet to get a response from him. I have ZERO problem waiting, but would like to know what the hold-up is (if the tracker is correct.) I just don't want a surprise delivery that I'm unaware of, because my salesman would probably never call and it would eventually become an abandoned order. LOL!

 

[doddsm]

Heck, at least you guys are shipping. I'm a 9/8 blend that is stuck with an "in production" status. Lol! When it does ship, it'll be at my dealership the same day.

im in the same boat

 

[Wobblez]

Welp that was me, now i have to pick it up before I leave

haha! Hey I mean at least it’s good problems right? I figured that was yours, hopefully I’ll see mine in the next couple days! Congrats man!

 

[No C]

haha! Hey I mean at least it’s good problems right? I figured that was yours, hopefully I’ll see mine in the next couple days! Congrats man!

Alright eagle eyes. LMK if you see a 2 door base Green hard top leaving wherever you are. I'm kidding. Or am I?!?!

 

[Wobblez]

Alright eagle eyes. LMK if you see a 2 door base Green hard top leaving wherever you are. I'm kidding. Or am I?!?!

Most of them I see are staying within Michigan since I’m just northwest of the factory. But I’ll keep watching!

 

[Gorpolak]

I ordered the builtright relocator few weeks back, https://www.stickerfab.com/collecti...t-for-oem-standard-plastic-bumper-2021-bronco

Thank you for posting this and I see they have one for the capable bumper on their site!

Here is the front license plate solution I went with for my capable (steel) bumper

https://www.bronco6g.com/forum/thre...nse-plate-bracket-no-drilling-required.37149/

That seems to be the cheapest option around especially if I'm going to change out the bumpers.

 

[No C]

Most of them I see are staying within Michigan since I’m just northwest of the factory. But I’ll keep watching!

You probably won't see mine then. It should be going south then east.

 

[Accented Wanderer]

Congrats! I ordered the modular bumper as well. Where do you plan on putting your front license plate if your state requires it? I do not want any holes in the front valence and haven’t seen adaptations for the modular bumper.

Front Plate is not required in the state of Indiana. So currently there is no plan

 

[M4Madness]

Finally changed to "Built" status! Whew!

Late 9/8 blend

Sponsored