8

[35tires]

h

Sponsored

 

[adamruiz2001]

It all depends on Amp ratings for the lights you choose.

 

[35tires]

I'm looking at the 20" baja designs light bar s8:
Wattage/Amps: 112W / 8.12A

and the baja designs squadron pro 3" cubes
Wattage/Amps: 40W / 2.90A x 2

 

[sklnbnzaz]

If you're using up fitter switches in the bronco you should have no issues with amperage on any switch. Save 1 and 2 for your higher amperage draw items. I would use the Driving Combo for the bumper and Wide Cornering for the A-Pillar (Ditch lights) pointed out at a 45 degree angle. You will not likely, however, be able to legally run any of these lights on road or highway, off road only...

 

[35tires]

I am using them on dirt trails, nowhere big open places to rip. Not a person in sight for dozens of miles.

 

[swooshdave]

I am using them on dirt trails, nowhere big open places to rip. Not a person in sight for dozens of miles.

Location: Texas. Not a person in sight checks out...

 

[Gtrekker]

If you are using the Uplifter switches, it easy stuff...

For me, I'd run spots on a roof light bar for the most light penetration for distance if you are running pedal down and do floods for the pillars with combo in the bumper.

 

[scotman623]

Simple way to figure out amp size for fuse is take the total wattage divided by Voltage most batteries are 12.5-13.5 volts = Amp- fuse size.. Good for future reference..

Sponsored