Search results

Hey everyone, I never post these kind of messages but but I would give Jeff @Middleton Motorsports a huge shout out! I was going crazy with this 2025 bronco base up fitter conversion. Of course their video was my guide and made the disassembly and reassembly very straightforward.. Unfortunately...

Thx yes that’s beyond my pay grade! I’m going to go with the Hans pilot and call it a day

bad news for 2025 Base owners.... sadly it's just not possible in a 2025 Base! the bottom line is the A pillar harness (vehicle side) doesn't have the pins to support the upfitters signal wires. So...you can replace the fuse box, you can get a new harness and you can get the Upfitter console...

ok....figured it out! sadly it's just not possible in a 2025 Base! the bottom line is the A pillar harness (vehicle side) doesn't have the pins to support the upfitters signal wires (pic attached) So...you can replace the fuse box, you can get a new harness and you can get the Upfitter console...

its as tight as can be and still the issue Tried another fuse box with aux fuses same issue I double checked a pillar harness connection and that’s good The harness it connected to in the a pillar had several blank spots Stumped!

ya...I followed that video 100% when I did the install. I'll dismantle and double check but that is a major pain! im 99.9% sure I didn't mess anything up.

may need to wait to re-visit this with the dealer as they seemed a bit unhappy for wasting an hour on me today

went to dealer this am....they updated things for an hour and didn't solve this issue

I lost track! too much!!!

thanks! correct..I have the base! I bought 3 parts: 1) Upfitter switch console 2) replacement harness 3) updated fuse panel. I followed the sticky directions and the Middleton motorsports installation instructions. I got the proper parts for the 2025 using a badlands VIN and double checking...

Well that was a fail! dealer checked and they have no software updates or configuration on their side to do. I did just test each Upfitter fuse and there is no power to any. I tested multiple BCM fuses, including #2 in the interior of car and they are all fine. I tested adjacent fuses to the...

Hi! Thx for your response! The switches glow blue so I’m assuming the harness is providing power to switches. I did just test each Upfitter fuse and there is no power to any. I tested multiple BCM fuses, including #2 in the car and they are all fine. I tested adjacent fuses to the Aux fuses...

Headed to dealer in am to see if my switch issues are just a software update…fingers crossed! I’m the meantime centered the lights :)

is yours 25?

right but do they turn orange when you flip them even without anything connected?

thanks! the space on drivers side was pretty tight but was able to fish it through! taped up the third. lights/kit seem great! mine didn't have upfitters so I added the switches, fuse panel and harness. I connected the ground.

do your switches change to amber when you flip them?

Hi All! Well I sourced all the right parts (switch console, proper harness and fuse box) and did the install. Everything came apart and went back together well. Only problem now is the up fitters glow blue but when switched they don't turn orange.... Fuse box is secure/seated properly...

this was from chat got...maybe for 2025 software needs to be updated Why this is happening Blue light = backlighting (illumination circuit) Amber/orange light = “active” status signal On the 2025 Bronco, the amber “on” indicator will NOT work unless the vehicle is programmed to know the...

yep...but apparently something isn't right. my switches light up blue...but when I flip them they go dark (don't light up orange).