I am basing the connector off the auto start stop eliminator that is available here.
https://www.autostopeliminator.com/collections/ford/products/2021-ford-bronco-autostop-eliminator
They have a video detailing how to get to where the connector that has the wires tapped into it should be...
The connector its wired into appears to be the auto start stop plug. Could be they disabled it by pulling power from the obd2?
EDIT: essentially they are either applying voltage to the right pins or grounding themout so that it thinks the button is always enabled. I guess its a simple test has...
Yea, kind of interested to see what a 255/80r17 would look like too. I know I went to 285/70R17 on mine and they made a world of difference, but I also changed my wheel offset slightly.
Sold the rock rails today.
Still Selling:
4 door OEM soft top
5 OEM BD Steelies with General Grabber ATX 265/70R17 tires
Now Selling:
SAS Fender Flares
Prefer local pickup if possible.
I just swapped out my wheels from the stock BD steelies to some KMC wheels and noticed that the brake rotors aren't secured by the wheel hub. I suppose I am not the best mechanic but the brakes seemed to wiggle a bit when I put on the new wheels (not exactly confidence inspiring). I also had to...
I bought these flares a bit ago and had them on the vehicle for about 8 hours, just didn't like how it made the bronco look. Spent to much time thinking about it and missed return window.
Asking for 350 OBO, local pickup preferred in phoenix az valley area, although I still have the box they...
I don't believe it is advised, but it should be doable. Might make a bit of a mess when you remove it though. Usually that style doesn't require you to drain the oil but they will suck up some oil and drop it all over the place if your not careful. May want to drain the oil into the 5qt you used...
Still selling the following:
1000 OBO - 4 door OEM Soft Top (replaced with bestop, roughly 1400 miles)
250 OBO - 4 door OEM Rock Rails (replaced with go rhino steps, roughly 500 miles)
Also have:
800 OBO - 5 OEM BD steelies with General Grabber 265/70R17 tires. (roughly 2000 miles)
I may be misinterpreting what I am seeing. Its likely just the same screen for everyone. I have a 22 black diamond mid package. From what I understood the sensors were only on the high package. I would be interested in adding them, assuming its not a huge hassle. I guess I can crawl under there...
Do you happen to know if you can add the sensors if you dont have them arnie? mostly just curious since the front sensors show up on my screen but don't seem to work.
I currently have the "Capable" bumper, doesn't seem to have much that makes it capable though other than being steel instead of...
Mine had some whistle when I did my first drive, but the dealer seemed to fix it somehow during their inspection to send me off. I did notice that many of the hinges on mine are very tight and the sealing was not that best. I switched to a bestop and it appears to have much better sealing...
Interesting, radflo never came up when I was on google.,
I did air my tires down from 39 cold to 35 cold and that made a huge difference on the stock shocks.
Looks like I misentered my dimensions thinking fedex wanted inches instead of feet. Shipping would likely be more than a 1000 dollars for a lot of places. UPS won't give me a quote so shipping is likely going to be a no go.
Yea, I had test drove a BL non sas before I ordered so I was surprised by how much better it rode. Might be a good way to go.
Thanks for the input on tire pressure, I will give that a shot too once I get my new wheels/tires.