Search results

Have also seen it several times during the last few days

It will be interesting to see what you build for a slide out tailgate. I'm planning to do a slide out drawer with a slide out shelf over the drawer with a fridge mount, hoping to build something that will still allow access to the under floor storage. But that project is for next year.

Yeah, looked at those areas, in front of the gas tank was the most protected area, if I decided to proceed with the second tank it will have to go up into the area where you mounted your compressor. Believe I can build a mount to hang a tank in that area since the tank doesn't have weight the...

Found a home for the 1 gallon air tank, was hoping for a vertical mount for draining water from the tank, there's a nice protected spot in front of the gas tank for a horizonal installation. See post two in this thread. Haven't found a good space for a second tank. There's room where...

Bottom line there's no easy answer on antenna selection, if you want max performance never buy an antenna just on looks, pretty antennas are usually poor performers, and if you try to hide an good performing ugly antenna, it might perform worst than the pretty antenna, Below is the long winded...

First off nice install, however according to the ARB installation manual the compressor is not rated to be submerged or exposed to road spray. Items 5 and 6 from page 3 of the installation manual. However with your mounting location and the height of your installation above ground level your...

Saw his post over the weekend, not a bad location for the tank, however plan to mount vertically as I plan to install a drain valve on the bottom port of the tank to drain water. Plus don't want to drill any holes thru the floor / bed of the vehicle

Bronco delivered to dealer Monday this week, took delivery on Tuesday, no surprises at signing. MSRP as agreed to at time of order. 25 miles on the clock at time of delivery. Built 10/27. shipped 10/28 to FL

Am considering a second tank, only bought one to start with, if I find room for two, will source a second tank and install.

Update # 4. Completed the installation this last Sunday. Installed the air-line from the compressor to the remote 1 gallon storage tank and rear air line quick disconnect mounted on trailer hitch. Used 1/2 air-brake line and fittings, they are rated at 150 psi working pressure. Also installed...

Picked up Bronco this Tuesday from dealer. Have mounted a dual ARB compressor under the hood of a 2.7L Badlands. Fabricated the mount tonight, took about 4 hours. Used some aluminum that I had on hand. Also used a set of Quick Draw Brand Brackets to attach the compressor to the mount I built...

Ford Stock Closed at $20.15 today, the first time above $20 per share since Sept 2001

It's only water resistance, the installation manual states " Mounting location should be above the highest possible waterline to avoid submerging during water crossings"

Checked with the dealer today, expected next Thursday delivery to dealer, train was in Valdosta GA earlier today. Built 10/27, shipped 10/28 May not be the aurora borealis, here's a sunrise from the backyard

From the Ford Web Site, new electric crate motor https://www.f150gen14.com/forum/threads/ford-unveils-f-100-eluminator-concept-w-e-crate-motor-from-mach-e-now-available-for-custom-builds.6735/ "THE FUTURE OF CUSTOM VEHICLES: FORD UNVEILS ALL-ELECTRIC F-100 ELUMINATOR CONCEPT WITH NEW EV CRATE...

actually the Blue Stickers date back to 10/26, when I first pulled the WS on 10/19 it was blue with a 10/26 blend

Give you credit for one thing, you have 90 to 95% chance your statement is true, as 90 - 95% of the threads on the forum are pointless, here's a couple of other pointless threads for reference. https://www.bronco6g.com/forum/threads/does-acc-work-with-trail-control.16093/...

After seeing your reply back in mid Sept about UPR did some digging around on the subject, and did find what you were referring to on some of the mustang forums, but the issues all seem to be from about 2 to 3 years ago, didn't find anything later. I'll keep this in mind if I consider another...

It's alive and built! Ford tracker tonight shows built 10/27 and all modules show alive. However this morning there was no update from either the Ford tracker or modules. No ship date yet WS has 10/26 Blend, 2453 rotation

The Method Bead grip are also on my short list of wheels presently considering since the Rock Monster wheels are a year out.