This "custom TPE mat" is not the one that goes on top of the drawer is it? And if it is not, I too am curious about how it will be installed and/or if it'll be removable. Would really like to have a mat that covers that area under the drawer but taking it out just to install a mat will be a...
Nice write up, I agree.
I have had mine installed for a few weeks now and its been great for everyday use. Recently have used it to tie down two small animal crates, love the rail system on the sides, and the slide out made it easy to load and unload them. I haven't had the chance to use it for...
I know this is an old thread but I wanted to post up what (I thought)worked for me to fix this as I have had this issue recently. I had tried all reset options, pulled fuses, battery cables , factory reset, etc.
The Fix (not):
While audio was āplayingā (volume still stuck at zero) I went in to...
I currently have this issue on my passenger front door. As @Dan-O stated it appears mine is the cable and the keeper as well. I did try the alignment bolts on the bottom at first and it definitely helped but the culprit I believe is that cable vibrating against the inner door skin. Pulling the...
I would use the 5h1t out of them, like Jerry Rice used stickum or like Bill used Monica, or like Cosby and⦠eh you get the point.
Sticker adds like 10hp.
My 4 door 24 Wildtrak would stick at those front round posts. If you unscrew and drop the sun visor retainers you can pull down on that front trim. Those platforms up front are two torx bolts each, canāt remember the size, maybe 40 or 45. You can loosen those and reposition them slightly. You...
The ez lip you can get on Amazon isnāt permanent and it just sticks on. Canāt remember what size to buy but if you do some measuring you can figure it out. But I have to say I am in the tape it and paint it club. Plan on doing it to mine soon with some 2k raptor liner.
https://a.co/d/cOWHJC9...
Did you end up cutting yours back? I am thinking of doing this, mine is close enough to the latches that if you hit the pot holes in the mall parking lot it'll start to rattle against the molle panel. Super aggravating. Like you said that cut out needs to move back about 1.5".
I had this happen on my Ram Rebel. If you use the right words itās covered. Haha. Delamination of the materials. Had it happen on my seat and my steering wheel. The vinyl delaminates from the backing, thatās poor quality/craftsmanship. If itās tearing because you have a clip on your belt or...
this^^^ had this except the other way on a ram I owned. After the bilstein lift I had to buy an adjustable bar. Took me a few hours but I got the rear axle centered again. With that bracket the bar may be pushing your axle to that side.
Yours will probably be canceled as well. Probably on or about 6/14. Seems like it stays in their system for a month then drops off. Thatās what my order did with a month long hold at the bank on the funds. When I pressed a rep about this I was told itās in their terms that they can cancel an...