Search results

I just used velcro strips.

You have a rough estimate how much this will cost?

I didn't add a harness. I didn't need the rear fog light wire to extend to the rear bumper as the rely I used was installed in the engine bay. I ran a wire from the engine bay through the firewall grommet and down to the driver's side kick panel into the sill plate. Just spliced it into the...

Got the rear bumper pods wired up and tested out today and everything works great They were Diode Dynamics SS3 pods mounted in the bumper. I wanted to be able to turn them on and off with the rear fog light button on my light switch. I ended up using a 4-pin relay. I used the rear fog light...

My plastic bumper didn't have any license plate light at all. I replaced the bumper and relocated the license plate. Was just wondering if I really had to write up lights for it. Guess I better do it just in case. Thanks all for the clarification!

Is it required? My OEM plastic bumper doesn't have license plate lighting, so I'm wondering if it's really required.

Thanks. I'll send them a note, too. It's not a huge issue, unless I need to use footage for an insurance claim or something and the date/time stamp is wrong. Did you send yours back?

Did you ever get the date thing figured out? Mine resers to 2020 everything I restart.

Installed the Brandmotion Fullvue mirror/dash cam/rear camera along with mostly installed my Expedition One rear bumper with tire carrier. The camera I stall was pretty straightforward, just really involved as you have to remove a lot of the trim panels to get the wiring in place. Didn't...

How minor is the modification for a 4-pin harness? I know many of us dropped factory tow to get our bronco faster and added 4-pin harnesses.

Just installed this using your instructions. Very helpful! Thanks for posting this! Some of the trim panels were a bear to remove and replace. It's a pretty involved installation with all the panels you have to remove just to get wiring in place. It all works. Just haven't installed the...

Yeah bottom is hinged. Just pull steadily and firmly from the top on each side.

Reinstalled the beauty rings and the faint vibration seems to have gone away.

Got my powdercoated beauty rings back and installed them. NOTE: The CJPony replacement hardware for the beadlock rings do not work with the beauty rings. They are too long by about 1/4 inch. I think they are meant for use when you use actual beadlocks with the tire bead sandwiched between the...

I've had mine off for a couple weeks waiting for powder coating. I did notice a slight vibration. Just got my rings back and interested to see if it goes away.

Will do. PNW rainy season started in full force, so just need to find a dryish day to do the install of new bumper and lights.

I think this could sit on top of the gear shade and the magnets on the side would hold it in position ok.

Thanks. That was my concern. Its a pair of diode dynamics ssc2 sport lights. I decided to go with a relay and use the white/blue wire as a trigger.

Can I wire rear bumper lights directly to the white/blue wire to have them come on with the rear fog light switch? Or should I use a relay with the white/blue wire as the trigger?

Came home from work and had a surprise waiting for me! It looks really well built and it's pretty beefy. Very well packaged with no damage Waiting for the bumper lights to come in and then I'll tackle the install. Planning to paint the bumper step plate white and the tire carrier insert...