Search results

Not a SAS but 285/75/R17 (33.9x11.25) with a 2 inch lift. Not sure how 33s would be, SAS might be a little overgeared for 33s.

Mine got beat up too, I put a MOLLE panel on it. Adds protection and a little bit of storage. You can find relatively cheap ones on amazon.

You can fit 315/70r17 but you'll need to remove crash bars and there will be some rubbing without a lift. I put 285/75r17(34s) on with new rims and a 2" lift but they'll fit fine on the stock rims and don't need to remove crash bars. If you're not planning on doing a lift at all I would...

Yes on the latest update you should be able to run the PCM Module initialization/relearn vehicle data. Everything else I followed this and everything works perfect.

Thanks for posting this lol. This saved me (and looks like a lot of people) a lot of issues. Just fixed the speedometer, tire pressure, and turned off double honk. Installed 285/75/17 tires with 2” lift, 2700 is the actual circumference but I was 2mph over at 2625 (my first attempt), 2575mm got...

Just installed Toyo AT3 285/75 17, RTR Evo 6 +30 wheels, with Bilstein 5100 2” lift

just installed 285/75 17 Toyo AT3, RTR Evo 6 +30, with Bilstein 5100s ring #3 ~2” lift

Getting these exact wheels and tires installed this week, with Bilstein 5100s. Curious if you needed to take the crash bars off or just did because? I attempted to take mine off today and couldn’t get the bolts to budge.

Really like this, looks a lot better. A little more clearance too… I’m going to have to stop coming on here I’m getting too many ideas😂😂

Awesome, thanks. Looks good!

About to order these for when I put my new tires on. Thinking the #3 setting too. At that height did you just replace the shocks or did you have to change any of the UCAs or anything else? I heard anything above 2” you start to need new UCAs.

Thanks! If I can't find a takeoff by the time I get my new tires then I'll probably go this route.

Thinking about going this route if I can't find a take off. How much trimming of the plastic skid plate did you have to do? I'd be good with not spending money on a steel one. And I assume you had to cut or replace the base hooks?

Thanks but I'm really interested in finding a modular one. Haven't really found any non winch aftermarket ones I like.

Looking to buy a modular bumper if I can find one (like everyone else with a plastic bumper :)). Willing to drive a few hours or pay for shipping.

How's the MPG loss? Trying to decide between 285/70 or 75, and as my daily gas $ is sadly a factor. And no big difference in acceleration even though adding ~100lbs in wheel weight?

Nice! Looking at upgrading my tires too, leaning towards 33s but they still look a little small to me. How's the ride with that size / weight difference? Also how bad is your MPG getting hit? And is that with the 4.27 or 3.73? I have the 3.73 so curious how it handles. Thanks.

Any estimate when the +30mm 17x9 Evo 6 black bronco wheels will be back in stock?

2022 4dr BB 2.7 stock (for now) getting 21.8mpg with 87 gas. Probably 80% highway 20% town. Definitely get better MPG in normal mode vs eco.

Dang that’s annoying. I guess I’ll cough up a little extra for the IAG ones.