Search results

Happened to me yesterday when I tried closing the rear passenger window, it kept automatically going down. So I rolled it up again and held the button up for about 10 seconds, then turned off the vehicle. It worked and stayed closed. I was parking when it happened, so I was able to turn the...

Anyone running this set up? If so, what wheel offset did you go with? Photos?

I lifted my 2023 Wildtrak with Eibach springs. While the lift fits 37’s now with a max clearance kit, Einach matched the factory rake. Wondering if anyone has added a 1 inch perch collar to level this spring lift out? Thanks.

Sick photo. Thanks for info!

Looks rad. Thanks for the info and photos!

Thank you for the photo. Looks good! Wondering if you’re getting a little more lift than I got with my set up. Again, thanks for the info and photo!

Yes. I already added the JKS. No rubbing except with front bumper. Just wondering if the Ford modular bumper will solve for this.

Went with Eibach spring lift on 23 Wildtrak with Hoss 3.0. Running 37/12.5/17 Toyo RT’s on 17x9 Fuel Rebel with - 12 offset. Tires rubbed on plastic end caps on bumper, so I removed them. Thinking of changing to Ford modular bumper which I heard has more clearance. Anybody running my set up...

Had Eibach springs added to 23 Wildtrak to fit 37’s last week. Now lots of clunking sounds in rear over bumps, even driving over road imperfections on asphalt. Anyone have similar issues? The shop I used is checking into this. Thought I’d float this out to see if others had similar issues...

Anyone running Eibach springs on Wildtrak Hoss 3.0 with 37x12.5x17’s? If so, how is the ride and please share photos!

Update to my earlier reply. Bestop just contacted me as I also posted my story on their Facebook page and included part details/model number etc. there. They said they will now be sending me the part necessary. I’m glad they made it right in the end.

As mentioned above, similar problems with the middle bow of the Bestop. Bought brand new from Ford dealership. The plastic piece in the bow that the bow bracket slides into was cracked. Horrible metal on metal sound/flapping in the wind. Called Bestop. They said they will not send me a new...

Anyone running this set up? If so, was tuning required, and/or what were the results? Thanks!!!

Thank you Bad Bronco. I actually ordered this already as someone earlier in the thread also posted the same suggestion. I’ll update with photos once the project is complete.(y)

Custom! Nice!

Thanks Beach Bum! I’ll give that a shot!

I went with 17x9 with a -12 offset and now have a gap/lost lower support from the rubber bump stop to the tire. Anyone have any suggestions where to find an extended bump stop replacement? I am only finding replacement parts for Jeeps. I attached a photo showing the issue I’m having. Thanks!

I just hit 3000 miles and have 16.7 average on Wildtrak/Sas. I had to train myself to ease up on the pedal, the low gears actually get you going pretty easily. I also use cruise control when I can. It made a big difference.

A few pics of 17x9 with -12mm offset and with stock Wildtrak/Squatch suspension and stock 315x70x17.

I went with 17x9 and -12 offset with stock Wildtrak Sasquatch suspension and stock 315/70/17 Goodyears. Zero rubbing. The half inch wider wheel and the -12mm offset widened out the stance and improved the handling on the road. I went with Fuel Rebels. Hope this info helps!