Search results

Couldn't have said it better!

I have a couple of shallwe chairs from Amazon, was looking for compact folded size and this and the cliq looked best , this was half the price. https://www.amazon.com/gp/product/B09Q8MV9BB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1

Closeups of my floating shelf for my hardtop - gonna add a 3rd pair of threaded rods at the front and an aluminum rectangular tube - that'll give me the extra span I need to store my mid panel turned longways. As you can see from the hoist straps - all pressure is relieved from the MIC top.

They're right down the street from me - small dealership, I would bring my Fusion there for oil changes, but not sold on bringing the Braptor there yet - this ain't helping their case.

Drill a hole in a small block of wood about the size of the tube and hammer in a razor blade at one side so it overhangs the hole to make the cut then pull it thru. Or you can d o this slightly more involved version - but you get the idea...

It's in the link for customtiedowns.com

I added the newer close up photos to the main photo gallery I have: https://photos.app.goo.gl/Eerm1DfNpW1yvwyw7 The frame itself is 41.5" x 24" with 45* miter cuts at the corners and 90* joining corner plates - you need this to be mitered in order to ensure you can get both bolts of the...

Sure thing...I'll take some better pics and some get measurements and hardware etc.

The AudioFrog's had the best sound of all the speakers I listened to, Infinity, Focal, JL, Kicker, JBL. I just couldn't justify the double+ price difference over the 2nd best sounding. I'm very happy with my choice, but if I was looking to go no limit budget - for sure they were at the top of...

Other option is to source the molex style connector, pins and wiring and make your own...seems like a lot of hassle for $15/pair. Or crutchfield

I made separate front/rear dollies for mine so that it would be easier to move around and keep the doors more protected within the confines of the PVC tubing. Trying to sort out how I want to incorporate my mid panel storage into my existing hoist setup. Excuse the mess in the garage.

That's a 10' ceiling and a surface mounted harbor freight 800lb hoist. Using the stock pulley/snatch hook. The cradle I made from unistrut and custom tiedown hooks are another 6" or so. Leaves about 6-8" of clearance. I use additional unistrut on ceiling and threaded rod with 1x2 aluminum...

Bluetooth versions are not recommended if you need to do something that take s a little longer in programming. I saw lots of guys having issues with that in the Fusion and Cyan Labs forums when upgrading their 3g modems to 4g - required a 60+ minute stable connection to reflash the TCU. BT...

Made my own using uni-strut and a harbor freight hoist and some custom tiedowns. Check out my build photos here. I can now do the entire roof by myself on or off. https://photos.app.goo.gl/Eerm1DfNpW1yvwyw7

I went with KC HiLites Cyclone 6 light kit as well - clear is SUPER bright (I have diffused lens as well) - for when the PoPo decide I shouldn't run blue anymore.

There's always the build it yourself route - my build is on page 11. https://www.bronco6g.com/forum/threads/diy-28-trunk-storage-shelf-for-4-door-broncos-no-cutting-required.31471/ All my build pics here: https://photos.app.goo.gl/jqC6Ng5hei4nT9gw7

I used these and I bought a terminal crimper and ferrule kit and made my own. The larger gauge cables seem to all have that wide ug though. https://www.amazon.com/gp/product/B08R6TX3XM/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1...

Memphis MJP6.

I kept the existing B&O amp, replaced with better higher efficiency speakers and added the Key 500.1 only for the Sub and ran that off the sub line level outputs. The only indication of anything beyond stock is the remote volume knob for the sub. My slide out tailgate hides my amp and onboard air.

I would absolutely NOT feel comfortable trying to hoist the rear and middle panel as a single connected unit. I am toying with options for suspending a second floating shelf so that when the rear is lifted and supported I have room for the misd panel just below it