I'm an old geezer, so watching a video isn't the same as having a set of printed instructions that I can have with me at the vehicle that takes me step by step through the installation process. If I wasn’t on this forum I would be at a loss at how to install since nothing came with the package...
Did a web chat with Oracle and it seems that installation instructions for this product don't exist (despite installation instructions being listed as a content of the package on their website). Their response was to watch the video on their website, which isn't very helpful unless you have some...
Getting "built" doesn't mean much in terms of when you might get delivery. Just search chip hold.
Some Bronco's built in January still have not shipped.
Not limited to Bronco. My son ordered and F-150 Tremor that was built last week, then was notified it's on chip hold with expected delivery in...
I've got a 2-door OBX Sasquatch and it clears my standard garage door with a few inches to spare. The antenna is slightly higher than the roof rack, so kind of a built-in height warning system.
I used TintFX in Vienna, happy with the products and service. Front window tint matches the back perfectly. Right around $100 all-in for the 2 front windows.
Clean the surface with rubbing alcohol first
Install about 1/8" above the lip of the hood
Start at the center rear, and move forward and outward
Don"t remove all of the protective strips over the adhesive and then try to install, peel each back slightly, and only remove the strips a section at a...
In the first week after delivery I got a stone chip on my windshield.
Installed the hood deflector and no rock impacts since. Maybe coincidence, or maybe the deflector works.
I used 303 Graphene nano coating and am happy with the result, although it will probably need to be redone in about 12 months. Prepped the surface with clay bar first, total time invested about 5 hours (2-door) and less than $40.