Search results

how does a 2022 Bronco built 1/3/22 leapfrog the vehicle for delivery from Miami Storage before a 2021 Bronco that had arrived to that storage before the end of last year. FYI the Bronco being delivered tomorrow had a blend date of 1/3/2022...

yep. it is 800 and counting if you forget. )

Anything we can do to help out. BTW, the week after we get our BL we will be gutting the inside of it for science... ) you will understand later. lol

A couple questions if you don't mind. The connections on the underside of the box, are they just held on by the bolts on the top side or are there tabs holding them in as well? I tried pulling but they are pretty firm. also... how much is the fuse panel?

at the moment you can install the switches but there are "NO" internal fuse connections for them. meaning you will have a bunch of pretty lights that are not usable. We are trying to help @RustysBronco out by puling our fuse box apart and figure this out. if it is figured out we will do a full...

@RustysBronco has figured out the process to install the Aux switches with the replacement of the windshield header harness. This was a great step in the installation process of making a non aux switch equipped Bronco to a Bronco with them. There is one last step that needs to be addressed. What...

With the info about the crappy valve still in question, warranty is king right now... Love the set up though. @LethalPerformance does the intercooler install without cutting anything?

on a side note the one panel when lifting up all the fuse slots came with it. How the fuse board is secured to the plastic cover? Hopefully by fasteners.that way you can get to that free to get the location open.

Weren’t able to move the panel up higher enought to get a good look or picture. The harnesses coming in the forward and rear side keep it snug. the two white connectors were tight on there and didn’t want to pull them too hard and break the mounting of them. I believe they do come off so just...

Since our Black Diamond is there. We went and changed our setup.

How much snow is inside the Broncos?

here are some pictures and info that might help. so to get the lid off... kinda remove the red circled nut, remove the items marked with blue arrow. there are tabs holding them one near the arrows as well. loosen the bolts marked in red and white. The reason they are marked in different...

We pulled one of the fuses out to see what the set up is going to look like under it. will pop it apart tomorrow and see what we can find out.

That's what I saw when we did the video. so until that is figured out the switches are decoration. We will dig into it tomorrow and get a bunch of pictures.

Jill will be talking to her parts guy for ford and getting a breakdown that they have do order the items if there is a further breakdown. he is out until monday.

do you have the image handy?

any work on the fuses? I pulled an fuse out and there is spade connectors that stick through the panel. I may take the top off and see if they are able to be removed? anyone out there have the break down of the fuse box? when ordering piece by peace of assembly.

We live in PSL... lol not to far away.

If @RustysBronco doesn't do one we would be willing to dig into it farther then we did before. I am unsure on the addition of the fuse box internals. That is if Rustysbronco is ok with that. We would go step by step on what needs to be done.

Well, the FE is a fully loaded bronco. where the fully load Raptor will be a lot more then the "starting Price". Remember the starting price for the bronco is 28,500. it's all the options that will come on the Raptor that will add up. I would be surprised if the fully loaded price goes over 85k.