Search results

That’s a bold prediction for the Seahawks to win the World Series. I just read this morning the team was for sale, but I didn’t think they would be moving to a different sport.

If you are considering doing this I would just cut the vinyl with a box cutter at the hinge so the piece now lifts up and out instead. Your floor wouldn’t be completely flat with the seats laid down, but it would be closer than it comes from the factory. You could theoretically build a deeper...

You could probably install it on top of the factory floor, but it would require longer hardware and possibly some sort of spacer. But if you did this the deck would now sit about .75” higher than the back seats, making it no longer flat. Also the jack access flap would not be able to open as...

I have a 4 door version so I would not be purchasing. But in my opinion I would rather the deck be flat with the rear seats. Take the extra 0.71” and make the drawer that much deeper. From my experience it is difficult to find items or cases to fit in the shallow drawer, so the extra depth...

I’ve never seen this event in Brea previously. I’m assuming it may be the first time being held there. I will definitely have to check it out if I’m in town.

Other option is to throw the bar pin in the freezer for a while. I always used to do that with uniballs when replacing them. Or do both for the hotdog down a hallway effect.

I don’t have a tailgate table, so I don’t have clearance issues. I was just stating that if @BA OffRoad had designed a handle similar to what I drew it would allow some more clearance for other owners and would also look cleaner with the deck having a straight edge on the rear. IMO they made a...

I agree. The handle looks a bit out of place, plus it is the part that seems to be interfering with existing tailgate tables. I rarely use the handle as I typically release the latches and pull on the latches to slide out the deck. This is a crude drawing, but something like this would look...

I installed it myself as well. Took a different approach though. I extended the glides on each side until they locked and then picked up the deck/drawer. Slid the glides into the vehicle and dropped them into place. Then hit the release latches and slid the rest of the deck in. This allowed me...

When I opened there homepage it was the first thing I saw on the rotating banner. Anyways here is the link for the bumpstops. https://camburg.com/collections/bump-stops

In their first photo they show two different styles. The one with the rod ends on top/bottom is their flapper style bumpstop. It is mostly designed for their suspension kit as they use this on a few different model trucks. The second one is a more traditional bumpstop and has a strike pad on...

AAL has info on the product page about adjusting the height and flipping the side brackets for added range of clearance. The amount of lift may vary for the Braptor brackets depending on if they also have the same number of holes and if they are at the same elevation from the floor or not...

Most of this stuff has been discussed in previous threads. The issue is that @BA OffRoad makes new threads about this item every few weeks so all prior info and discussions are lost instead of keeping all of that info together in one thread. It’s difficult to even go back and find pics or info...

Still available

Is that with the handle removed?

He has the RCI aftermarket skid plate.

DM sent

Ya I saved it too, I figured it would be nice to lay on when I need to get under the Bronco. I didn’t even think about repurposing it.

Still have this.