Did the 4-door replacement today. Made a huge difference. No rattling at all now from the front windows. Note: when removing the cover on the handle in the center of the door, pry from the front of the vehicle without pulling back too hard. There are a couple flimsy brittle tabs holding the...
I had a similar chirp sound. Turned out it was the windshield fluid reservoir rubbing against the frame/mount. Had to line it with thin foam anywhere it could come into contact with another surface. Maybe check that out. Good luck
The bracket provided by morimoto is kind of stair stepped to get the light a little higher. Even so, I'm very pleased to have a good solution for the snorkel side.
Finally got around to installing my ditch lights with these brackets. Works great! Wish they could have mirrored the bolt pattern on the cowl as the morimoto mounting solution uses the 2 bolts, which would have enabled me to mount them a little higher. But it worked well integrating the light...
Same thing happened to me last night. I live in Ohio and temp was -01F with a wind chill of -15F. Had a CEL and multiple notifications for other systems (hill start assist, etc.). Initially, it did not start. But after shutting off and restarting there were no issues, both last night and when...
FWIW. I've had my Everglades for 2 years now. I average anywhere from 19.1 in the winter to 20.7 in the summer. That's with a good mix of highway/state hwy/city driving. That's just normal driving. I don't have a lead foot, nor do I drive like a grandma.
I just want to once again thank everyone on this forum! I had persistent annoying squeaks and creaks coming from the back. Greased all the seals around the tailgate and rear window. Fixed! B6G: saving my sanity one post at a time.
Sorry about your loss OP. My dog, Conan passed away 2 months before I got my Bronco. He too would have loved riding in the new Bronco. I found a closely matching bobblehead that I mounted in the empty hero button slot. Now he rides on in spirit with me.
I had a crazy chirping sound in my Everglades (2.3L) while driving over any and all bumps big and small. It ended up being where the windshield washer reservoir mounted to the inside of the fender. Ended up unscrewing all the attach points for the reservoir and adhering a thin foam lining on the...
I went the cheaper route with the TopLift PROS LIFTnGo. I love it and wish I'd bought it sooner. Works well. As others have said, it takes up some room. I just couldn't justify spending $1K.
Amazon.com: TopLift PROS LIFTnGo Hard Top Removal and Storage System Compatible with Jeep Wrangeler 2 &...
The Heads Up Display from F150 LEDs. Kind of a goofy mod. Thought it would help me to stay focused on the road ahead, but it's still a little distracting. The speedometer is also off by 1-2 mph from the dash and the clock runs way too fast and needs to be reset every few weeks.
Finally got around to doing most of these wind proofing measures. Got some small improvements. Used the extra Z-shaped weather stripping on the bottom edge of the front panels to cover up where all the janky original weather stripping comes together (see pics). That made the biggest difference...
2022 Everglades.
Had an extremely annoying squeak coming from what I thought was under the dash (or maybe the hood). It happened when going over any small uneven bumps in the road (so all the damn time!). I spent weeks pulling and tugging everything under the dash and inside the engine bay...