Search results

I followed the same instructions. I did this on my garage. I see that you are in TX, so is hot (better for adhesion). I left the mesh in place, but secured it with clips to avoid getting stuck to the curing velcro. Now, when I was cleaning the areas using rubbing alcohol, I went over a few...

Like Johny Mo stated, your budget determines the outcome. You can also build the system little by little and improve the sound incrementally as your budget grows. I will just change the 4" front and back with good quality speakers (JL C1/C2, Hertz, Morel's or Memphis Audio) then test for a...

I installed mine on a soft top. The way I interpreted the instructions is to let the velcro cure on the vehicle for 24 hours by itself. I did not installed the mesh top or top after the 24 hr period. No issues in almost 2 years.

Here you go. The first 2 pics are the current set up. I used L brackets to mount it to the ford molle hinged cage (Very sturdy). I also added kilmat to the floorboard, underside of the lid, front of the cage and side panels to minimize rattle. It did its job and reduced a lot of the rattle...

Jeff, I do not have experience with the B&O system, but had the same concerns with my speaker selection. What I learned in the last 2 years from this site is that our options are limited to budget. Based on your current equipment, I say that your amp selection will allow you to build a great...

Dangerfoot is correct. Better dash speakers will improve your soundstage and give you what you are looking for. Now, the kick panel speaker being a coaxial might hinder the soundstage if you change the dash ones to 2 ways as they will compete for sound. I will go with a better 6.5 woofer on...

You will have the same problem when you charge it using the USB C if you are listening to music and using navigation apps from the phone. It happens on my wife's atlas too. Pain in the ass if you are traveling a long distance and shuts down.

I also have an aftermarket system, and had a different issue a few days ago. Only my front passenger speakers had sound. I did the soft reset on the radio and the system started playing normal again. Occasionally, the system will act buggy, but the soft reset takes care of it. I don't think...

I have the same results when using 93 octane (-1MPG). Now, as many, I can't justify the additional cost of going to 93 for minimal gains. Also, tire pressure played a role on my gains/losses of MPG's, seeing better mileage at 38-39 lbs, but a rougher ride. I do not have SAS on my BL's, the...

I have them on my BL. No issues whatsoever, and the Matte finish doesn't look out of place. Suggest that you clean very well the surfaces and make sure that it's warm outside (70'sh degrees or more) before install. That will help the adhesive to stick and cure.

Yep! You might loose some gas mileage if you reduce the air pressure to about 32-34lbs. On my BL non SAS I experienced about 1.5-2 mpg difference with less air.

Thanks!

Nice set up. Looking to do something similar, but rather place the lights behind the spare tire. Do you think that the spare mounted bracket can be placed behind the spare with the ledge that supports the lights facing forward? I am thinking about fabricating a mount using L brackets from the...

Never happen to my Bronco, but my wife's Tahoe had that issue. The mechanic diagnosed the issue as a bad carbon canister evaporator ( or something like that). Now, the Tahoe had over 180K miles in it. If it doesn't do it in all pumps, I will rule that out. Let us know how you solved the issue.

I paid a shop to install my system because the last time installed a system in my car was early 90's. Now, almost 2 years after installing it and reading almost every installation on this forum, I am confident that I can do it myself and save me some money. The most important thing is...

Wrap dental floss around it and call it a day

Press radio on/off button and forward track button at the same time until screen goes black. Release and wait for it to reboot. Less than 10 secs. https://www.google.com/gasearch?q=bronco%20soft%20reset%20instructions&tbm=&source=sh/x/gs/m2/5

I have the same issue, but on the right side of the screen. To correct it, I do a soft reset and it fixes the issue. Not convenient at all as the reset also resets the ambient lighting to 0. I think it is an update (or lack of) issue that eventually will get fixed.

I have the dense titanium on a carbonized gray Bronco. I chose this color as black will heat the interior more than the lighter color. I am in Texas, and trust me, with vinyl seats, after doing some mall crawling, it felt like seating on a hot skillet. Now, is a skillet in a low setting...

I am in the killeen/harker heights area. Killeen Ford have 38 broncos siting on their lot and Johnson Bros in Temple has 15. Pretty sure you can find one to your liking. I purchased mine from J Bros Dec 2022 and paid the markup as I needed a vehicle and the market sucked in the area. (sucks...