Search results

We are not going to pursue this for the time being just purely because the cost of the module from Ford is too high, this kit is unfortunately not viable. Happy to help with whatever questions you might have if you wanted to go down this path. We have done this conversion on a Mustang before so...

1. We initially had hoped 6AWG would be ok, but given the long run in the Bronco minimum of 4AWG is required. 2. 100A to be safe, 80a is probably fine. 3. CAN is required also. 4. It runs D class chips and a demand varied power supply, efficiency is around 90%+. Yes it gets warm but this is not...

We did the 6 inch rear pod conversion and used Hertz mpx165.3's Id always say run a coax so you have more flexibility with tuning. If you don't have a DSP then maybe you'd run a component to make sure the center doesn't kill the left and right image and acts more as a fill speaker...

The bronco specific kit will definitely be available as a stand alone kit for the amp via the website. Please direct message me regarding your purchase and we can organise something.

No so the Ford amp listing on our website just has a basic plug and play speaker harness generic to all Fords that run the B&O system. The Bronco kit will include a full length power and ground harness, a mounting bracket for the amp and the speaker harness for the front headunit that grabs the...

Both would need to be converted to A2B to achieve a flat digital signal

Read here, https://www.bronco6g.com/forum/threads/base-audio-system-line-level-interface-possible-mobridge.70474/page-2#post-1907321 Kit could be ready tomorrow! it's just it is really expensive unless you guys source your own second hand A2B ACM. We might just end up making a guide on how to...

I am pretty confident the ACM does encompass the HD radio, so if this is a feature you want then you would need to try find one with it. Otherwise, there are plenty of cheap used A2B ACM modules on ebay without this that would work just fine. We have done an A2B conversion with a 2017 mustang...

Happy to just send you out one free of charge when they are available. Shoot me an email. [email protected]

It's annoying being a car guy somedays isn't it. Well, at least for the wallet. Ill add you to the list. Ill make a post here when the complete kit is ready to ship.

https://www.bronco6g.com/forum/threads/base-audio-system-line-level-interface-possible-mobridge.70474/page-2#post-1891511

No so, what we recommend is REW on a laptop and the Umik feeding into that. To get audio into the system, a USB stick with pink noise is the easiest way.

No, still the same issue. You are dequing and trying to reprocess a heavily equalised signal and you will never get it back to where it was. Agreed, either way will be better than stock of course. But our system is the next level up again in terms of audio quality. One of our customers did a...

No offense taken, happy to justify! So this isn't just a sub amp, this is a 9 channel 1.2kw RMS full DSP amplifier that also has a sub channel. Firstly i dont think youll be able to find many other 9 channel DSP amplifiers with as much power as this for $1500. This isn't even in the same...

Thank you, we think its pretty awesome too. Currently there is no auto tuning, this is a feature we will add at some point hopefully soon. We recommend a UMIK-1 and REW (room eq wizard) as a fantastic value for money tuning microphone! We will have a few tunes available as starting points also.

If you have B&O it is on A2B, its as simple as that. Any Ford B&O system will be compatible with our amp!

Will keep you in mind if we move forward with this kit for sure.

Once you swap the ACM module over to the A2B one and code the car accordingly (If we end up doing this kit, it would include a coding dongle that does all this for you) the signal is then sent over A2B raw. So we get sent a unfiltered digital signal straight to our amp.

Are you in SoCal? We are always interested in guinea pigs.

This is a fine solution if you aren't that phased by top end audio quality or low end bass reproduction. Let me explain this issues with de-eqing: By grabbing high level inputs off a speaker level out, you are grabbing a signal after its been processed, filtered and after it has been...