Search results

@JAKExBAKE -it’s on his site- should be like $80 2018 - 2023 FORD WITH B&O PREMIUM SOUND PLUG & PLAY HARNESS KITS KIT 10 HARNESS ONLY

@JAKExBAKE - also you will likely need the B&0 subwoofer harness from Joe at PlugnPlay - he makes one specifically for the Kicker Key 500.1 Makes connecting your amp simple and it bypasses the B&O amp so you avoid any type of signal processing from the B&O on your new subwoofer...

@JAKExBAKE - I took the seat out to give myself some more room to work with the wiring because there’s not a whole lot of space behind the driver seat in the two door. I probably could have gotten away with using a plumbing snake and some electrical tape and honestly removing the driver seat was...

@JAKExBAKE - Yes my amplifier is on top of the sub box where Gearshade included a place to mount it. Fits perfect.

I got the Stinger amp wiring kit that is specific for Bronco with a mounting plate for the fuse in the engine compartment. It was plenty long enough for a 2-door but a little pricey. Stinger Bronco Amplifier Wiring Kit Pulled out my driver seat and took my time pulling the panels. It's a...

I have the square 8 kicker and the subwoofer box from GearShade and the Kicker Key 500.1 amp. It is amazing. https://additivecaraudio.com/product-category/bronco6g/ He now makes a 10 inch setup which he did not offer before. I was one of his first customers for the 2 door B&O box with the...

@JAKExBAKE - which speakers did you order for the Kick Panel location ? I did not try any of the Kicker brand speakers. I tried the Memphis 6.5 (which I have now removed from the post) - for my listening style, I felt they lost too much bass. I put the stocks back in and they've been there of...

Hi @JAKExBAKE - I am happy to try and answer your specific question but I am not sure I understand the 4+1 question ? In the kick panels, I would not suggest swapping the stock speakers right from the start- if you do, I would do it as the last steps as there is very little gain here IMO. Keep...

Thanks for sharing ! Good to get some solid feedback on the Hertz. Perhaps a fall project coming in my future ! 😄

B&O is all over the map with different car manufacturers. The Brono application is just OK. For many owners, it will be fine. As a bar to measure by, the B&O system in my 2018 Audi puts the Ford application of B&O to shame. Also have a friend with an F150 with the B&O and it's also average for...

What changes to Forscan did you do for the B&O ? Would love a link if you have it. Also, the key to getting the most out of the B&O amp is using speakers with the highest sensitivity ratings. Based on my research and others from the forum on the B&O system, the 2 suggested speakers are...

I have a mount from the Memphis I tried out. I pulled them out because I felt I lost too much mid-bass. What are your thoughts on the Hertz down there versus the stock 6.5's ?

What did you put in the kick panels out of curiosity ?

Out of curiosity - if you were going to sell, how would you turn the chimes back on ? I see in the Forscan spreadsheets, the values are these: 0 = Disable both; 2 = Disable drivers; 4 = disable passenger. Is the value of 1 to enable both ?

Does this help ? https://www.bronco6g.com/forum/threads/how-to-remove-center-speaker-trim-panel-diy-official-workshop-manual-instructions.50811/

Agree - tin snips and filed the edge real quick with my grinder to make them smooth - my OCD.

I think you will really like it. He makes a great sub box. I went for the square set up and a Kicker 500.1 amp to power it. The B&O amp mounts right on the box too so you don’t know it’s there. Also bought the plugnplay harness - what a breeze. Highly recommend this set up if you decide to move...

Ended up with a new amp and replaced the sub with Gearshade 😎

@hollowlift - they sure look like it. I believe the DCX series Hertz are the only ones that have the electric orange speaker boots so it’s highly likely. I will say one thing - I would be very reluctant to put those 6.5 coaxial speakers in the lower front kick panels. I suspect you might lose...

@hollowlift - also here is my post on upgrading speakers - with nothing else for the. B&O system - not sure if this will help you - B&O System Speaker Upgrade Options - Back to basics and keeping stock amplifiers and subwoofer