I pulled the amp & dsp out as well. The doors and top are off mine a good portion of the year and I felt I needed more power than what came stock. I also thought the B&O DSP was fairly limited and did not give you enough control. I went with a Kicker 360.4 for the interior speakers (all...
I know Foutz was creating true height perch collars for the Braptor, but they were not available when I bought mine. The RPG were made for the F150 raptor. I would have to default to them.
Two kicker 10’s powered by an 800:1 Kicker amp, the box was done by a local shop to me; they charged me $400 for it and customized it with the “engraving”. I ended up ripping the entire system out..
It’s completely counter intuitive in all 4 corners you rear would actually sag slightly. The springs in the rear are soft, so a 1.5 inch collar doesn’t push the spring up appropriately. Doing a 1.5 in the front and 2.25 keeps it very close to a factory rake. You need 6’8” to get it into your...
You will end up sagging in the rear if you do that. The rear springs are soft and you don’t get the equivalent lift. The best you can do is go the same height in all 4 corners and even then you will sag fractionally in the rear
Yes, Trail Grapplers, 1.5 in the front, 2.25 in the rear. That kept the factory rake. The rear springs are soft, so you have to go with a larger collar. I do not have the alignment specs, my shop did them.
Yep! That's mine! lol
So here is the build list.
RPG 1.5 in the front 2.25 in the rear
38x13.50x17 TrailGrapplers
TIS 556 Wheels -12 offset
Rock Slide Engineering Steps
Body Guard Front and Rear Bumpers
20 inch Rigid light Bar; 4 Rigid ignites, 10k Smittybuilt Bumper
KC Flexera 4...