Search results

What were the SWR readings?

703s and in anything but bronze 👍

The easiest 3rd party option would be to get the Curt, or similar, light harness. It plugs inline with your taillights, but you have to make sure you get the correct harness based on the taillights you have, either halogen or led. The hardest part is running the included power wire from the...

If you have the cover, you will have to remove the bumper in order to remove that cover. The cover has to be removed in order to mount the hitch receiver.

IAG, does this fit the 2025 model year?

Great! Ordered yesterday and looking forward to getting it.

Is there enough room between the Starlink and the top to remove the Starlink without having to remove the entire mount?

It uses the mounting points on the back of the roll bar for the C-Brace that is on the Raptors.

I would think you would be okay with an offset up to +25mm, depending on tire width. Check out https://tiresize.com/comparison/ if you haven't already. You can play around with different setups to get an idea of how a particular wheel and tire combo will fit compared to stock.

Outer Banks had it on 25 models. The center console armrest matches the dash as well.

Sort of resembles the new Land Cruiser grill

Haha, that's also what they told me about the loud engine pinging on my '21! 😆

My understanding is that the Start Stop Eliminator replicates ypu pushing the button on start up so you will have the message. If I remember correctly, I disabled it on my '21 using the Superchips programmer and did not receive the message at start up. Then somewhere around '23 ASS was not able...

I used the included mag mount and whip antenna that came with the mxt575. Stuck it inside the hard top and got an swr of 1.01. The ghost antenna was 1.65. The mag mount has to be over the metal where the hard top sits or swr readings will be well over 2. Hit the repeater from inside the garage...

+30mm

Who remembers when Ford was going to replace the Mustang with the Probe? There was so much outrage from Mustang enthusiasts that Ford just added the Probe as an additional model.

I believe what people are saying is when they try to flip the visor down, in the latched, forward position, it hits the rear view mirror. Mine does this as well, but as tall as I am, I wouldn't be able to see out the windshield if I moved it more than an inch or so downward.

If it's what I think it is, it's a fuel additive they pour into the fuel tank. At least that's what the Ford QuickLane tried to charge me $100+ for a few years ago. They tried selling it as "induction cleaning" and that it was Ford recommend. It is not.

Yes, there is a difference. The Ford tow hitch comes with the 7/4 pin connector and the module that installs behind the cargo area panel. The wiring is already in place to plug the module into and the 4/7 pin plug. Programming is required for the for this, either by a dealer or Forscan...

It's perfect! Looks factory and should have been available as a Ford option. Would be great for road trips and camping.