With door closedā¦..I had to hold my button down for about 10seconds for it to take. I read for 5 seconds and it didnāt work. Then roll all the way down and all the way back up. If thatās how youāve been doing it and itās not working out, take it to dealer
As OP stated, thatās how he did it and appears to work. However, most of these have instructions to drill hole in box between fan and evaporator, turn AC on Max and insert tube with provided tip and empty contents into plenum. Then plug hole with provided plug. Here in Arizona I do it to all my...
In my opinion, Iām sure the water alcohol mixture is meant to clean the surface of the paint for good adhesion of the graphic, but highly doubt it will affect the ceramic coating. If you feel you want to remove ceramic coating for sure, polish it of with some polishing compound. Thats really the...
If dealerās giving you the run around, and If youāre a self problem solver, I would swap 2 fronts to 2 rears and see if it makes a difference. If thereās a difference then it could be tires that were on front, then it would narrow it down to tire/wheel issue.
Yep⦠those stubbed wires are for the Upfitter switches which now is available. Unfortunately I donāt know what all is entailed in wiring up the switch but I think itās got a plug for it up above the mirror. Not sure if fuses for it are already there?
Zooming in on photo, almost looks like it was cracked and somebody attempted a (poor)plastic weld fix. Have it replaced while still under warranty. If it was out of warranty I would seal up what looks like a crack by plastic welding it.
There are previous posts here with same problem and seems as though low battery was the problem. Could try using Fob to lock, then unlock and then lock again and then try using the proximity sensor to see if it works. But low battery has been culprit for many. Could check battery voltage with...